Jump to content
SAU Community

Recommended Posts

1) Prof Sheepdog BOV $120

2) NISMO Black Anodized Aluminium Gear Knob $90 *SOLD

3) POLARG H1 bulbs (bluish white, HID look) $50

these bulbs are as bright and bluish as the PIAA ones but at quarter of the price!

4) WEST H1 bulbs (Metal White, 3950K) $25 SOLD

5) NGK Platinum plugs PFR6A-11 (month old, receipts to prove) set of 6 $45 *SOLD

6) PROLOCK steering wheel lock $30

7) Morel Millenium 6 (6.5" splits, crossover) *offers*

8) Addzest Cassette deck *offers*

forgot to include 1 more!

9) stock R33 gtst BOV *offers*

Hi,

Does do the POLARG and WEST globes fit a R33 GTST ser 1?

May I ask what is the differnce in both. Definately interested in getting at least one pair. Probably the POLARG. Where abouts are you located, I'm in the SE side of Melb.

Thanks

yup they most definitely do!

the POLARGs are brighter than than the WESTs and have a bluish tinge to them. The WESTs are just whitish.

i'm located in the southbank area.

gimme a call on 0403356708 to arrange somethin.......

:P

okie here goes.............*deep breath*

yup, the plugs were in the car for about a month before the car started to act weird, as in the car was sluggish at certain rpms, so i brought it to the mechanic who at first thought it was due to the plugs and changed them. But that didnt solve the problem and to cut a long story short, after some troubleshooting, the problem was found to be caused by a f****n piece of plastic that had broken off my air filter and was lodged in the mesh of the afm, thus causing the intermittent "sluggishness" of the car (ie: when the above mentioned f****n piece of plastic was being thrown about in the intake section). That all said and done, i found myself with an extra set of perfectly fine 1 month old plugs, and dun really need them atm, which brings us back here.........

*phew*

and I would say the POLARGs are 80% as blue as the piaas, but you're welcome to see them for urself! :P

cheers!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...