Jump to content
SAU Community

Installing An N1 Oil Pump!

r32r32

By r32r32,
in General Maintenance

 Share

Recommended Posts

SECURITY Grand Master

SECURITY

Posted
Posted

you're meant to fill it up with vasoline so as soon as you start the car up its got oil pressure.

before you start the car just leave the cas and injectors unplugged and crank the motor without the spark plugs in. this will build up oil pressure faster. once you've got oil pressure then put it all together and off you go.

Godzilla32 Veteran

Godzilla32

Posted
Posted

N1 oil pumps suck. So for starters i'd throw it out and use the stock one over that. They have layered gearsets which are more prone to cracking from vibration during such things as hitting the rev limit. To answer your question all i suggest to do is use some grease to lubricate the gearset. These pumps have no problem priming so the old vaseline trick isnt necessary. As mentioned remove the spark plugs and unplug the ignition module and wind the engine over until you get good oil pressure then put the plus in and reconnect the ignition module and fire it up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PLYNX
      Is this saveable r32 gtr seat

      By PLYNX · Posted

      How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • RB2533
      UniClutch

      By RB2533 · Posted

      Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Butters
      UniClutch

      By Butters · Posted

      Oh and how is the rattle when foot is on the clutch ?
    • Butters
      UniClutch

      By Butters · Posted

      Did you get the sport or track ? From what the documentation says the uniclutch has a small amount of movement to disengage.  So your story of tricky pedal setup seems common.    Hopefully you got it bled up too, as the bite point moving around is usually either plates wearing in or air in the line.     
×
×
  • Create New...