Jump to content
SAU Community

Recommended Posts

Hi everyone,

100,000 kms is fast approaching on my 98 R33 GTST S2 so i've gone and got a quote from a reputable local garage, as i dont have the time/resources to do it myself...

Was hoping someone would be able to let me know if this quote i got is miles off what it should be, or whether its reasonable, this is a copy of the quote form:

100,000km service - $75

engine oil (pro 15) - $32.25

oil filter - $11.95

EPA + consumables - $14

VKMA92504S Timing belt kit - $449.00

Labour to install (approx 4hrs) - $400

Tune engine - $112.50

Spark plugs - $27

Check high tension leads - 0

Fuel filter - $28

Total - $1149.70

You can see that the bulk of the price is from doing the timing belt... i know its an involved process but just wanted to check with someone in the know that this is about right...

Thanks for any help guys!

dan

Link to comment
https://www.sau.com.au/forums/topic/214148-am-i-getting-ripped/
Share on other sites

That price looks cheap to me...why arn't you doing water pump at same time?

Ive just noticed from doing a bit of searching that it looks like a good idea to do the water pump aswell.....whats it worth?

I'll probably get it done also while he's in there if this price is reasonable...

Just went down to the local repco who priced the exact same timing belt kit at 650 bucks...lol

Ive just noticed from doing a bit of searching that it looks like a good idea to do the water pump aswell.....whats it worth?

I'll probably get it done also while he's in there if this price is reasonable...

Just went down to the local repco who priced the exact same timing belt kit at 650 bucks...lol

Think they are about $170 for the part.

Or you can buy a full service kit from here for $380 (including water pump):

http://www.kudosmotorsports.com/catalog/in...th/21_22_26_123

VKMA92504S Timing belt kit - $449.00

Thats a bit high isnt it?

Im sure timing belts arent that much?

Check kudosmotor sports (trader sections) - he sells 100k service kits for nissan.

Pick that up and supply your parts to your mechanic.

YES do waterpump!!

Have a look at the trader section and get that kit he sells. WORTH IT!!

I did a 100000 km service on an r33 late last year

I can't remember how much I paid for the parts but I'm sure the timing belt kit was a lot cheaper than that.

Also If you are doing the water pump check the price from Nissan, you may be surprised. The non genuine water pumps have 1 hole that doesn't quite line up. You can do a mod for this but I'm sure I only paid about $20 extra for a genuine pump. It is a lot easier to fit especially if the mechanic doing the job isn't a Skyline expert.

Also they would have quoted you for standard spark plugs. Get platinum or Iridium plugs. You won't have to get them changed for another 100000km. With standards they will charge you an hours labour every 20000 km or so to change them. So it is cheaper in the long run

Yeah im gonna go with the 100k HD kit from kudos with the genuine water pump....looks pretty reasonable in comparison to what ive been quoted for just a standard belt + tensioners...

Yep the engine tune was to set the timing...

And im gonna have to pass on the platinum/iridium plugs for the reason that in a few other threads on here i have read about the fact that skylines run rich, foul the plugs and end up with a missfire - a missfire that mine suffers from. If i can be sure that its not the plugs causing this problem, i will consider iridium plugs for economy etc... but im still tryin to figure out where my miss is coming from, but cheers for the advice nonetheless....

From memory:

Gates tripple strength timing belt $125 (Acme parts) I think you can get them cheaper from Justjap !

Idler and tentioner bearings (I think) $85 (CBC bearings)

Cam and crank seal (3) $18 (CBC bearings)

Water pump (RB30) $52 ( Acme Parts)

Mechanic to install the lot $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...