Jump to content
SAU Community

Recommended Posts

Gday All,

I'm moving to Tassie within a couple of weeks.

Last night I was watching an Ignition DVD and they made the comment that there is no 98RON fuel in Tassie?!?

Is this true or not? I just checked BP's site and it says there is BP Ultimate down there, but I'd like comfirmation from some locals.

Also I'm having some more work done on my R34 and a dyno tune just before I leave, so in the event that I'm going to have permanant problems getting 98 down there I'd rather tune the car with a tank of 95 instead, for obvious reasons.

So, whats the go down there? Naturally I'm hoping that the big 3 fuel companies do supply the good stuff down there!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/
Share on other sites

Yeah pretty much every BP in Hobart sells ultimate. I assume itll be the same for Launceston or anywhere else. For some stupid reason Shell or anybody else hasnt got their act together on it yet, oh well, less business for them!!

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3782268
Share on other sites

hey mate yeh they do sell BP Ultimate. where abouts u movin too?

Hi Trent,

Good to see Ignition is wrong :)

I'm probably moving to St Helens initially (pending approval from owner who better hurry the f*ck up with an answer), just to rent

but I'm actually looking to buy property somewhere.

I havent decided where to buy just yet except to say somewhere semi-rural, it won't be in the Hobart or Launceston metro areas.

Will be glad once this move is over... :blink:

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3783945
Share on other sites

Thanks for the replies everyone, looks like I have nothing to worry about fuel-wise :)

And yeah, supply has been patchy up here too.

Shell hasnt had any all year, BP has been patchy and I've recently been using Caltex Vortex 98 quite a bit, my car seems to like it as much as the BP Ulitmate.

I'll have to start reading the Tassie section more often to suss out what the boys in blue are like in terms of defecting, and the regs in general down there.

oh and roadworthys for rego when the time comes.

I try to keep my 34 low key in terms of any outrageous mods but of course technically speaking its probably not roadworthy...

So far just FMIC, turbo booster, panel filter, exhaust (Varex though), staggered wheels. I do plan for a new turbo however, will have to do that later as I ran out of time to get it done up here (CRD has been doing all work on my car so far).

I don't drive like a hoon - unless the mood takes me (as it does occaisonally) and I am somewhere quiet/remote :blink:

Also will need to change plates (obviously) and am trying to find a good custom plate that hasnt been taken already...

I noticed the buggers have upped the prices very recently too - over a grand for a letter only plate :\

Anyway, enough rambling... Look forward to meeting you all in the near future ;)

Cheers

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3784068
Share on other sites

Yeah should be able to get Ultimate anywhere, I filled up somewhere on the east coast and got it..

I have gone back to Caltex's Vortex '95' though, my car seems to go better on it than what we are sold as 'Ultimate'.

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3784468
Share on other sites

Hay Wayne,

I live in Scamander when im not at uni (10-15mins south of St Helens) and work/hang out in St Helens. BP there is open 24 hours and it sells Ultimate at about the same price per litre as Hobart :D

As far as the cops go mate i've never had any problems with being pulled over/defects etc up the coast...they're more interested in booking bogans hooning round in old commodores nd such rather than hassling us guys that look after and take pride in our cars...even if we have a few mods that arent exactly legal :D haha

Im a bit biased as i moved there as a kid about 18 years ago but the east coast is a great place to live mate, have you already lined up a job?

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3786139
Share on other sites

Yeah should be able to get Ultimate anywhere, I filled up somewhere on the east coast and got it..

I have gone back to Caltex's Vortex '95' though, my car seems to go better on it than what we are sold as 'Ultimate'.

Hmm, now that is more than a little suspicious :blink:

If it keeps happening to you I wouldnt mind knowing (by PM perhaps) what servo(s) I should avoid...

No way should you car run worse on a higher octane fuel???

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3787391
Share on other sites

Hay Wayne,

I live in Scamander when im not at uni (10-15mins south of St Helens) and work/hang out in St Helens. BP there is open 24 hours and it sells Ultimate at about the same price per litre as Hobart :down:

As far as the cops go mate i've never had any problems with being pulled over/defects etc up the coast...they're more interested in booking bogans hooning round in old commodores nd such rather than hassling us guys that look after and take pride in our cars...even if we have a few mods that arent exactly legal :blink: haha

Im a bit biased as i moved there as a kid about 18 years ago but the east coast is a great place to live mate, have you already lined up a job?

Thanks for the info mate, St Helens sounds pretty good to me :)

I havent been to Tassie for a few years so my memory of St Helens is a little rusty, other than to say I know that whole area is nice.

Well it is 99.9% confirmed we have approval from the owners of the property that we can rent it for a few months, which is a relief... one less thing to have to do!

I'm surprised the BP is 24 hours, which is handy.

Sounds like no problems with the cops, which is good (unless you're a bogan I guess :huh:

Not chasing work at this stage, to cut a long story short... and when I will be I'll be self employed anyway, so no problem there.

Thanks again for the info mate, might have to go for a cruise one day? Cheers :rofl:

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3787410
Share on other sites

  • 3 weeks later...

Just an update - I arrived a bit earlier than planned.

Basically as soon as the removalists did their thing on the 15th, I thought bugger it - I'm heading south right now...

So I booked onto the Spirit of Tasmania, arrived in Port Melbourne on the 16th and arrived in St Helens on the morning of the 17th - exactly the same time as the Targa hit the town as well :thumbsup:

I was lucky to get in just before the roads were closed...

So if you see a black R34 with NSW plates...it's me, say hello if you can.

I already ordered the new personalised Tassie plates last week, hehe :(

Glad to see the 98RON is plentiful down here.

Catchyas!

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3828061
Share on other sites

Must be time 4 a cruise soon then mate :( Im in hobart at the moment but guna be headin up to St Helens alot for football when my shoulder gets right so il keep a look out 4 ya. If you see a white S2 R33 gtst with an autostyle sticker across the bak give us a wave :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3828196
Share on other sites

Quote:

So if you see a black R34 with NSW plates...it's me, say hello if you can.

Think we were on Spirit with you????? We were in the heavily overloaded pearl silver Aristo from QLD.

Does your 34 has the left inboard tail light half dull. (very very nice car, loved the exhausts)

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3834718
Share on other sites

  • 3 weeks later...
Must be time 4 a cruise soon then mate :) Im in hobart at the moment but guna be headin up to St Helens alot for football when my shoulder gets right so il keep a look out 4 ya. If you see a white S2 R33 gtst with an autostyle sticker across the bak give us a wave :happy:

Most certainly will :)

Did an oil change today, was well overdue too so I compensated by using Motul 300V :wub:

Anyway, I might take the 34 out tomorrow down the east coast, maybe all the way to Hobart, as I still havent been there since I arrived a month ago.

She's got a nice new set of Targa Tasmania plates as well now :)

Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3873999
Share on other sites

Quote:

So if you see a black R34 with NSW plates...it's me, say hello if you can.

Think we were on Spirit with you????? We were in the heavily overloaded pearl silver Aristo from QLD.

Does your 34 has the left inboard tail light half dull. (very very nice car, loved the exhausts)

Yeah, sounds like my 34, has the Xforce Varex muffler with the twin pipes.

I arrived in Devonport on April 17 if that helps?

Were you the guy who spoke to me before we left Pt Melbourne??

Cheers

Edited by Wayne_J
Link to comment
https://www.sau.com.au/forums/topic/214178-98ron-in-tassie/#findComment-3874006
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, an R34 workshop manual is downloadable. The R32 GTR one which is findable everywhere would also do the job, seeing as almost all those bolts are same-same enough.
    • It can be hit and miss, I can fit 15mm ones on the v37, but only because the wheel happens to have voids on the mounting face that allow it to fit. Have you checked the mounting face of the wheel and know it will not sit flush? Rather than cut (or try and find shorter) studs, just buy a thicker spacer (unless clearance from the wheel to the guard does not allow it), then everything is reversible in future
    • Obviously you need shorter studs (don't just cut the original studs off!) and really short nuts that will fit in the spacer. Thus exposing the problems with thinner bolt on spacers.
    • https://www.carsales.com.au/cars/details/2002-holden-commodore-ss-vx-ii-auto/SSE-AD-18219062/?gts=SSE-AD-18219062&gtssaleid=SSE-AD-18219062&pageSource=details
    • does anyone know tie rod torque setting and anti roll bar for r34? Is there a workshop which shows various components torque setting?
×
×
  • Create New...