Jump to content
SAU Community

Fg Falcon Xr6 Turbo - Quickest Aussie Built Car


Recommended Posts

As of today, Journalists will be wiriting up the new FG line up..

I got these figures from drive.com.au for the xr6t

0-100km/h: 5.1 seconds

0-400m: 13.4 seconds

Top speed after 400m: 172km/h

From the article:

For the record, the air-conditioning was on. There were no stunts, no tricks, we just squeezed the accelerator. It did it like it was brushing its teeth.

This not only makes the latest Falcon XR6 Turbo the fastest Falcon to date, it also shoots it to the top of the leader board in Australian performance cars. It’s faster than both the Holden V8s and its own big brother, the Falcon XR8 (which stopped the clocks at a comparatively slow 6.3 seconds).

Since the FPV F6 is expected to come with a 310kw figure, expect the 0-100 acceleration time be in 4 seconds and quarter mile in on mid to high 12 seconds

http://www.drive.com.au/Editorial/ArticleD...;vf=12&pg=2

Edited by Barbarian
Link to comment
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

its still a ford

and its fairly cheap for a brand spanking new car from a factory showroom that can run some decent performance numbers.

Hell, a skyline is still a nissan isn't it?

Link to comment
Share on other sites

Is it just me or does every photo of the new Falcon look like it has a really skinny trackwidth?

GT-R times will be much quicker than the Falcon.

I've seen a couple fg xr's on the road and they appear some what smaller than BA/BF's.. also from what I have read, tracks for both front and rear were widened.

Ford Aus promises this car to be the best handling Aussie built car to date.

Link to comment
Share on other sites

hell yeah

bring on the fpv f6

it was always said that the BA/BF were the best looking fords ever built - i think they have surpassed that with the FG

very very stylish....

(i dont think there is a common exterior panel between the BF and FG)

Link to comment
Share on other sites

i wonder :thumbsup: if it will have shitty ill fitting plastic bits in it and other things that fall off or break :laugh:

parents have a territory AWD ghia and nothings fallen off yet (and its 2 yrs old...)

Link to comment
Share on other sites

Not bad. You'd think theyd release photos that aren't in a shit colour...

Car companies always take the most eye-catching colour since it photographs the best.

From Nissan's perspective, look at the horrible Sunset LeMans orange (and the new solar orange) that most of the 350Zs in the promo posters etc are shown in. Really vibrant when printed, and it comes off the background well, but in the metal its really tacky.

The old BA/BF performance Fords had their promo / press cars in that sickly green, too. Great to shoot, bad to look at.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • From memory and please correct me if I have this wrong, the nismo that come with half shafts are specific for that diff centre. You may be able to find Nissan ones that match up but you'd need to understand what nismo are doing.    Best option is get  a pair of 5x1 axles, they usually don't cost that much and direct swap over for the 3x2(6 bollt) 
    • AFAIK, the length of the shafts has NOTHING to do with the ratio of the diff.
    • It depends on what the guy who bought its Ratio is. Mine is a 4.36 Jus Jap told me anything above a 3:9 has equal length shafts which the Nismo center's shafts were not.
    • If those shafts in the last 2 photos are the ones that came with the diff, you have no hope of fitting the other ones because they are completely different 
    • I have recently fitted a Nismo GT Pro Center second Hand buy still in the box i got stubs with it but they are 5 bolt and I need 6 (3x2) I was told by Just Jap that for a 4:36 ratio the stub axles are equal length sku 38220-0V161. They didn't have any in stock but I picked up the ones pictured. The one with 5 bolt are the ones that came with the LSD. The right side went in no issues but the right....I have happened the fk out of it put it in a press and it still sticks out about 5mm too far. It was sticking out about 25mm but after bashing it like Chris Brown did to Rhianna I managed to get it a bit further in but seems stuck again now. Any ideas? Should I just leave it 5mm out and send it?        
×
×
  • Create New...