Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

not the biggest fan off it.

dont like the sloping back and tail lights. toyota aurion-like.

interiors ok and they are pretty decent numbers :down:

still..as pround as i am to be an Australian, i dont think i could own an Aussie car. (unless classic muscle)

too common on the roads, next year a new model comes out, which makes the prevous one nothing special, i like cars that stick out and have a bit of timelessness in design

Jap or EURO FTW.

Edited by jake33

fastest Australian built car? didn't 1 of the HSV's run a 12.9 ages ago? and aren't the VE GTS' like 350kw?

I'm not being smart, I'm asking genuine questions...I'm a ford fan over holden after all...

not the biggest fan off it.

dont like the sloping back and tail lights. toyota aurion-like.

interiors ok and they are pretty decent numbers :D

still..as pround as i am to be an Australian, i dont think i could own an Aussie car. (unless classic muscle)

too common on the roads, next year a new model comes out, which makes the prevous one nothing special, i like cars that stick out and have a bit of timelessness in design

Jap or EURO FTW.

The BA design lasted 6 years from 2002 - 2008, its long enough dont you think? Besides, Australian manufacturers don't have the luxury to pour millions on a new design every couple years.

As for your Jap cars.. it changes shape every four years

R32: 1889 - 1993

R33: 1993 - 1997

R34: 1998 - 2002 :D

One interesting thing about the new falcon is that it is still based of the AU falcon. That was the last time the falcon had a clean sheet design. So the chassis was fantastic for its time. And the optional fully independent rear for the AU's was crazy tricky as well. But was dropped from the BA for costs reasons.

So ford aus must have some pretty talented engineers to keep the new falcon at least up to commodore standards.

I really like it and would be happy to own one. Maybe in a manual though. I don't feel involved enough with an auto.

Anyway, my only real criticism about the whole car is the steering wheel looks far from resembling anything that should be in a sports car.... it's f***ing hideous!!! Really bad design & thinking there considering you hold onto and look at it everytime you are in the car because it's right in front of you. Looks like something that belongs in a Winnebago, not an XR6 turbo. :D

OK, so what its like when its not being downhill by grandma...........?

A XT Falcon has a fuel consumption of a 10.1 litres every 100km's.

A XR6 Turbo is 11.1 litres

.... and VE Commodore sucks up 11.3 litres for evert 100km's.

In conclusion, a XR6 Turbo drinks pretty much the same as your ordinary VE Commodore Executive. Both the FG and VE weigh the same at 1700kg's, FG being roughly 50kg's lighter

Edited by Barbarian
I really like it and would be happy to own one. Maybe in a manual though. I don't feel involved enough with an auto.

Anyway, my only real criticism about the whole car is the steering wheel looks far from resembling anything that should be in a sports car.... it's f***ing hideous!!! Really bad design & thinking there considering you hold onto and look at it everytime you are in the car because it's right in front of you. Looks like something that belongs in a Winnebago, not an XR6 turbo. :D

That's why you can always opt for the Premium Sports package that comes with momo steering wheel and gear knob, leather seats, 250w 8 speaker audio, colour Human Machine Interface thingy in the center, ipod integration and bluetooth.

By mid year im thinking of placing my order in ego or vixen color :down:

fastest Australian built car? didn't 1 of the HSV's run a 12.9 ages ago? and aren't the VE GTS' like 350kw?

I'm not being smart, I'm asking genuine questions...I'm a ford fan over holden after all...

Yes that might be the case even though GTS being a premium $80k HSV model, twice the price of a XR6 T.. but im pretty optimistic on FPV F6 giving the GTS a great spanking for its money with a $20k less price tag :D

Fear the Ford & FPV with their inline six turbos :D

Edited by Barbarian
The BA design lasted 6 years from 2002 - 2008, its long enough dont you think? Besides, Australian manufacturers don't have the luxury to pour millions on a new design every couple years.

As for your Jap cars.. it changes shape every four years

R32: 1889 - 1993

R33: 1993 - 1997

R34: 1998 - 2002 :D

i agree with you about changing the shape and model of cars. every car manufacturer does it. by 'timeless design' i was more refering to the shape and model of most falcodores, after new models and series come out the the previous become a little boring and dull. in my opinion anyway

i guess an example for me: seeing an EL XR8 falcon i personally would not think anything of it or even look twice. however if i saw a 32 gtr or a an oldskool rx7, cars like that to me are cars that i would want to own, be more interested in and still have that shape and stigma.

everyones opions diff though.. :D

time will tell anyway.

im sure Wheels mag or Motor will do a VE and FG battle.

they love that shit

Edited by jake33

I want an XR6T with the ZF 6 speed auto. Maybe in 2010, the last year of the I6, I'll try and buy one. :D

I prefer the look of the BA/BF though. Ford's styling direction works really well on the Mondeo, but on the Falcon it just doesn't look right. Its not the "oh no" that the AU was, and still is, but it doesn't have the "niiice" factor the BA (and VE) did when it was unveiled.

That's why you can always opt for the Premium Sports package that comes with momo steering wheel and gear knob, leather seats, 250w 8 speaker audio, colour Human Machine Interface thingy in the center, ipod integration and bluetooth.

By mid year im thinking of placing my order in ego or vixen color :down:

Yes that might be the case even though GTS being a premium $80k HSV model, twice the price of a XR6 T.. but im pretty optimistic on FPV F6 giving the GTS a great spanking for its money with a $20k less price tag :D

Fear the Ford & FPV with their inline six turbos :D

Well the thread title does say 'quickest aussie built car'....one would assume it had set the fastest time of any australian built performance car....

As for the steering wheel, it does look terrible indeed. The BA XR standard wheel was nothing like that, and looked good. buyers shouldn't have to pay $600 for the optional Momo to have a decent looking, sporty steering wheel. A decent looking sporty steering wheel should come standard on a sporty car, with the option of going better again for more money.

Keeping in mind I'm a ford fan...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...