Jump to content
SAU Community

Recommended Posts

hi all, im very new to this forum, i have tried to find an answer to my question but searching

but i couldnt find and threads in relation to it so im just gonna ask it again,

My R33 has recently started to surge, and want to cut out just as the turbo is spooling up,

and sometimes while i am just driving at the one speed, but is worse while accelerating..but only does it

when the engine is warmed up, never does it when it cold.

the best way to describe it is, it feels like its running outta fuel (yes there is fuel in there!)

could it be the igniter packs?

any help would be much appreciated,

great forum by the way!

cheers, craig

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/
Share on other sites

I have this problem after I fitted a electronic boost controller and turn the gain or boost level up. But when I turn the boost level or gain down the problem always goes away. Sometimes with diffrent fuels the problem would come back so I had to change boost / gain levels depending on the fuel. Fo you have a boost controller fitted?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785564
Share on other sites

if it sounds like its popping its probarly the coils

but if it making all the right sounds but going no where then takes off like a bat outta hell

it will be the normal r33 flat spot

most people change the ecu and have it tuned to fix the problem

but there are other ways around this problem it just depends who you speak to

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785608
Share on other sites

Are you running standard boost? If yes then it's not the boost cut.

My advice:

Do a search on-

O2 Sensor/oxygen sensor. Yours might be dirty/dying

AFM. It might need a clean

Spark plugs. Change them

Coilpacks. Wrap them in tape/silicone

Fuel pump. Maybe yours is on the way out. Change the fuel filter too, it's a good idea anyway.

If the problem remains after all those then get professional help. Or a psychiatrist.

Edited by R338OY
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785641
Share on other sites

as far as i know, the turbo has been a flowed, but seems to now be running less than the standard 7 psi, i only have a manual boost controller under the bonnet, ill change as much as i can, coils, spark plugs leads etc, if it keeps happening, ill just have to take it to morpowa, or boostin oz to get them to figure it out...thanks guys

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785708
Share on other sites

ok, i took the coil pack cover off, gave it a thrash to make the engine hot, it didnt do it, except for when i first started driving (when it was cold)

i got home , turned the lights off to check for a sparks fromk coils, and there was nothing.

i bought some new ngk laser platinum spark plugs that will be going in tomorrow.

could this problem possibly be my AFM?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789011
Share on other sites

ah ok.. 2 of my friend's r33 had the same problems too

put it on the dyno and check the fuel pressure, might be your fuel pump

may also be fuel pressure reg too, though not very likely. i'd check fuel pump first

coilpack and afm are other possibilities, but if afm's cleaned like i've mentioned in the other post it should be fine

if afm is playing up or dirty your car wont idle properly in most cases

Edited by chiksluvit
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789139
Share on other sites

ok, i spent some time under the bonnet yesterday, changed spark plugs (ngk laser platinum) cleaned afm thoroughly and checked/cleaned igniter packs, also wrapped them in electrical tape just in case,

all seems good, no more surging or choking, but this typical r33 flat spot you all spaeak of is now obviuose, doesnt do it all the time, but every now and then when i boost it hard. for now, it doesnt really bother me, it still eats most ls1's so thats all im worried about at the moment ; )

i also took out the bleeder valve beacause it wasnt always hitting the 11-12 pound it usually does, instead it was only reaching 5-7 pound.

it didnt seem to make much difference without the bleeder valve, but does it matter if i leave it out?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791059
Share on other sites

taking the bleed vavle out definatly wont hurt anything

the flat spot though i know how to fix it without changing the standard ecu

i have done it to my car and many others and has worked everytime

ok...how?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791145
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
×
×
  • Create New...