Jump to content
SAU Community

Recommended Posts

hi all, im very new to this forum, i have tried to find an answer to my question but searching

but i couldnt find and threads in relation to it so im just gonna ask it again,

My R33 has recently started to surge, and want to cut out just as the turbo is spooling up,

and sometimes while i am just driving at the one speed, but is worse while accelerating..but only does it

when the engine is warmed up, never does it when it cold.

the best way to describe it is, it feels like its running outta fuel (yes there is fuel in there!)

could it be the igniter packs?

any help would be much appreciated,

great forum by the way!

cheers, craig

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/
Share on other sites

I have this problem after I fitted a electronic boost controller and turn the gain or boost level up. But when I turn the boost level or gain down the problem always goes away. Sometimes with diffrent fuels the problem would come back so I had to change boost / gain levels depending on the fuel. Fo you have a boost controller fitted?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785564
Share on other sites

if it sounds like its popping its probarly the coils

but if it making all the right sounds but going no where then takes off like a bat outta hell

it will be the normal r33 flat spot

most people change the ecu and have it tuned to fix the problem

but there are other ways around this problem it just depends who you speak to

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785608
Share on other sites

Are you running standard boost? If yes then it's not the boost cut.

My advice:

Do a search on-

O2 Sensor/oxygen sensor. Yours might be dirty/dying

AFM. It might need a clean

Spark plugs. Change them

Coilpacks. Wrap them in tape/silicone

Fuel pump. Maybe yours is on the way out. Change the fuel filter too, it's a good idea anyway.

If the problem remains after all those then get professional help. Or a psychiatrist.

Edited by R338OY
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785641
Share on other sites

as far as i know, the turbo has been a flowed, but seems to now be running less than the standard 7 psi, i only have a manual boost controller under the bonnet, ill change as much as i can, coils, spark plugs leads etc, if it keeps happening, ill just have to take it to morpowa, or boostin oz to get them to figure it out...thanks guys

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3785708
Share on other sites

ok, i took the coil pack cover off, gave it a thrash to make the engine hot, it didnt do it, except for when i first started driving (when it was cold)

i got home , turned the lights off to check for a sparks fromk coils, and there was nothing.

i bought some new ngk laser platinum spark plugs that will be going in tomorrow.

could this problem possibly be my AFM?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789011
Share on other sites

ah ok.. 2 of my friend's r33 had the same problems too

put it on the dyno and check the fuel pressure, might be your fuel pump

may also be fuel pressure reg too, though not very likely. i'd check fuel pump first

coilpack and afm are other possibilities, but if afm's cleaned like i've mentioned in the other post it should be fine

if afm is playing up or dirty your car wont idle properly in most cases

Edited by chiksluvit
Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3789139
Share on other sites

ok, i spent some time under the bonnet yesterday, changed spark plugs (ngk laser platinum) cleaned afm thoroughly and checked/cleaned igniter packs, also wrapped them in electrical tape just in case,

all seems good, no more surging or choking, but this typical r33 flat spot you all spaeak of is now obviuose, doesnt do it all the time, but every now and then when i boost it hard. for now, it doesnt really bother me, it still eats most ls1's so thats all im worried about at the moment ; )

i also took out the bleeder valve beacause it wasnt always hitting the 11-12 pound it usually does, instead it was only reaching 5-7 pound.

it didnt seem to make much difference without the bleeder valve, but does it matter if i leave it out?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791059
Share on other sites

taking the bleed vavle out definatly wont hurt anything

the flat spot though i know how to fix it without changing the standard ecu

i have done it to my car and many others and has worked everytime

ok...how?

Link to comment
https://www.sau.com.au/forums/topic/214337-rb25-surging/#findComment-3791145
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
×
×
  • Create New...