Jump to content
SAU Community

Recommended Posts

hey all i just had my ssqv installed. backfiring heaps lately.

i had my safc tune b4 the ssqv was installed.

do i need to retune it or it makes no diff??

n one more question.

if i have a recirculation adapter for my ssqv, will there be any affect if i change between atmo n plumb back once a while.

thanks!

ps: if there was a topic similar, could u just post the link for me! =p

many thanks again!

Link to comment
https://www.sau.com.au/forums/topic/214423-ssqv-installed-after-safc-tune/
Share on other sites

BOVs won't effect performance or anything.. unless ur running high boost and the stock one's leaking

you dont have to retune your car

you can use dec air so it doesnt stall at the lights, but you have to be careful because that can effect the cold start too... it happened to me

check your cold start airflow using the safc and set it at that.. but even with that the car still stalls...

or just change your driving style, don't drop to neutral and roll to the lights, only drop to neutral just before the car's about to come to a stop, then this way it won't stall

/\ -- for post above..stalling issues are common with ATMOS bov's due to the loss of air quickly when slowing down eg to lights when in neutral etc or i have even heard of it when people drive slow between gears. it tends to happen under load.

" or just change your driving style, don't drop to neutral and roll to the lights, only drop to neutral just before the car's about to come to a stop, then this way it won't stall " i run an ATMOS HKS ssq bov n have never had this problem, it due to the tention of the bov.

there are stalling issues after installing the ssqv.

Only thing that is different is the backfire and the wanker noise :D

thanks guys! :O

sorry guys....

dammit. gotta proof read b4 posting....

i do not have stalling issues.

just backfires and the wanker noise. LOL

i am so sorry for confusing u all.

SORRY!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...