Jump to content
SAU Community

Recommended Posts

Item: Nissan RB20det

Age: not sure

Condition: spun a big end, had done bout 90000kms

Price: $400 ono

To Fit: (What car) whatever u choose

Location: Northern beachs ,Sydney

Contact: 0417986654 or PM me

Comments: Gday i got my old rb20 out of my cefiro for sale, it has spun a big end, i tryed putting new bearings in it but it still knocked. Will need crank reground, or get a 2nd hand crank and will be all good. Comes less engine wiring loom, AC compressor. Pretty much everything else is there. I have a series 2 RB25det turbo/actuator and dump (77000km NO shaft play) i can throw for $400, it will bolt straight up.

I also have 4 sale-

Series 2 RB25det turbo (77000km NO shaft play) straight bolt up for rb20det aswell

RB20det ECU

RB25det sump

rb25det AC compressor

RB20det oil relocator

Make me some offers

Prob some more stuff il have a look when i get home.

Edited by kretch
Link to comment
https://www.sau.com.au/forums/topic/214435-fs-rb20det-engine-spun-a-big-end/
Share on other sites

*i also have a tubular exhaust manifold to go with the turbo, has a crack in it but easily fixed.

*Ive got a Apexi AFC the one with the knobs- $150 ONO

*RB25det engine mount brackets and bolts (the silver bits, not rubber mounts) open to offers

*RB20det air flow meter, good con $80

*Stock intercooler piping for 1997 Nissan Stagea. open to offers

Edited by kretch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so all I can suggest is that - if you have all the parts, and you have all the wiring looms, and you have all the electronic modules, then....it really is just a wiring problem. You likely have a damaged wire, pin, etc, somewhere.
    • Yup, bought this bad boy and hopefully it will be ready to pickup today. Had $5 credit on top of it so it worked out really well!
    • Yeah it is really until until you get a feel for it....then it is easy. Which is no use to you really. I'd buy that torque wrench. One thing from sure, many (most?) tyre shots overtighten the f**k out of wheel nuts, so don't worry if they were tighter when you tried to take them off compared to when you do them up. I've had some crazy tight ones come back from shops, quite apart from the potential damage to the thread, I can't see a smaller person taking the wheel off on the side of the road
    • Hey mate, thread dredging hahah To answer you directly, yes I had my itbs oversized and custom butterflies etc made by EFI Hardware in Sydney back around 2017-2018 if memory serves. My setup had a vast amount of other changes too though, so no direct comparisons unfortunately. i went from oem itbs, HPI manifold and internal gate hks 2835 pro S; to 49mm itbs, cnc port matched Nismo plenum, RB25 Neo lower runner adapter hand port matched, r31house v2 Takoashi MAX equal length twin scroll manifold with twin 38mm tial gates and a FP HTA3076 with 1.01ar twin scroll real hosing. feom power Fc to a link fury wired by 12volt, r32 gtr fuel tank conversion with frenchys twin 460 / surge tabk fuel hanger combo kit, 1659cc injectors, full 4 inch turbo back stainless exhaust, Z34 6 speed, Tomei 2way with 4.3 final drive and a ton of other shit. ive posted elsewhere here with complete run down, but here's a graph from its initial tune with no boost control on, 20psi gate springs only and e85.   7542AE72-DA92-4E0B-8660-B0940FEA7F24.mov
    • On sale mate, $55. Sorted. https://www.supercheapauto.com.au/p/toolpro-toolpro-torque-wrench-1-2-drive/565734.html?utm_content=paidsearch-pmax&gad_source=1&gclid=Cj0KCQjwytS-BhCKARIsAMGJyzqYEnwWmhWf6gxTST_Nz06Gd2VePgyvL7lh6PWrQtbjXTsI6TqSCLEaAuaCEALw_wcB&gclsrc=aw.ds
×
×
  • Create New...