Jump to content
SAU Community

Really Want A Nismo Muffler

scotty014

By scotty014,
in Wanted to Buy

 Share

Recommended Posts

scotty014 Veteran

scotty014

Posted
  • Author
Posted

is there anyone out there selling one or know where i can get one. i saw one on ebay but it says pickup only, and i dont live in canberra, its a bit far to travel for a muffler.

scotty014 Veteran

scotty014

Posted
  • Author
Posted

im not sure how much to offer you becuase i wouldnt have a clue how much they are worth. all i know is the one on ebay is going for $100 which im guessing is cheap.

  • 1 month later...
Kinks Grand Master

Kinks

Posted
Posted
im not sure how much to offer you becuase i wouldnt have a clue how much they are worth. all i know is the one on ebay is going for $100 which im guessing is cheap.

I have one exactly like that first image but I like it far more than $100... sorry, they are a really really nice looking muffler. Hate the canon shit with "sik bro" blue titanium handjob tips that everybody has these days.

/rant :)

Hope you find one!

Yawn Mentor

Yawn

Posted
Posted

I may be able to get one for you, except its from a friends s15. If all you want is the muffler then it shouldnt be a problem as the piping def wont suit your car. Depends how much you are willing to pay for it, as he will be selling the system as a catback.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Rb25det Belts Change

      By joshuaho96 · Posted

      Everything I found online said never use it because it'll dramatically reduce belt lifespan.  No, but I have seen excessive v-belt tension cause the audible bearing noise from excessive radial load in things like alternators. So don't overdo it. Ideally you set it to manufacturer spec using a proper belt tension guage. I tried the "clicker" type gauges but those cheap things are trash. They read way too low even when you're careful.
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      This is kind of where I've ended up for the most part. It's easier for me, easier for shops that don't have to deal with my weird criteria/picky standards, etc.
    • silviaz
      Rb25det Belts Change

      By silviaz · Posted

      Will do. Suprised if it's not the starter motor considering it's 30 years old. Will get a volt meter though. Battery is close to new.   Cheers for your help, always appreciated.
    • GTSBoy
      Rb25det Belts Change

      By GTSBoy · Posted

      This almost never happens these days. No. Clean your battery terminals and make sure they are tight. Use sandpaper on a dowel if you have to, to get oxidation off the inside of the terminals, particularly on the -ve. Check the earth cable from battery post to chassis ground and engine ground. Make sure the contact surfaces are clean - including the threads on the bolts that anchor them - because that's where a lot of the contact occurs. Wire wheel on a drill is a good thing for this. Make sure the crimps on those cables are all sound. Assuming none of that causes an improvement: Check the battery voltage after it has been resting for a while. If it's at the lower end of the range, put it on charge for a while, then see if it will crank better.
    • silviaz
      Rb25det Belts Change

      By silviaz · Posted

      I just checked my belt, it wasn't super loose but I could bend it past 90 degrees a small amount so I tightened it up and for the first time ever my car didn't crank first time, had to crank it again lol. Don't know if that was because I tightened the belt or if it's my starter motor going out (been having slow starts for some time). Coulda also been when I was recording I didn't crank the key properly and it didn't save the recording lol.   Is that a thing if you overtighten a belt it struggles to start?
×
×
  • Create New...