Jump to content
SAU Community

Recommended Posts

Not sure on costs but Mobile Injector Service can do highflowing. I reccomend spending the money and buying bigger injectors tho.

What are some reasons to upgrade to bigger injectors apart from just having a newer item in there?

when your stock injectors cant flow enough fuel to your engine from either turbo increase or just boost pressure you need more fuel to equal the amount of air going in on a ratio.I woulnd tget hi flow ones my old man has had bad expericence with them.I just buy new ones and so be it plus there nto that expensive now, you can get 555cc nismo ones for aound 750 to 850 a set

when your stock injectors cant flow enough fuel to your engine from either turbo increase or just boost pressure you need more fuel to equal the amount of air going in on a ratio...

Yeah i knew that bit :P

...I woulnd tget hi flow ones my old man has had bad expericence with them...

What kind of bad experience? what happened?

stock rb25det injectors can be highflowed to approx 650cc with out losing their spray pattern once u go bigger than that ur pattern starts going all over the shop. Mobile Injector Services do these and i think they're roughly $400 and the injectors are pretty much brand new.

Yeah i knew that bit :laugh:

What kind of bad experience? what happened?

Well basically the guy who did these ones,( dont want to name anyone except he is from towommba area) didnt do a very good job of them plus its a bit ruthless to do them.The spray pattern is crap,like a turning on a garden house and one of the pintels in the number 4 injector was broken from his bad doing and caused number 4 piston to basically crack the length of it in two.All the fuel was washing oil off the bore,hence causing damage.Spray pattern is important.IM not sure on Rb25 injectors but these were on SR20det ones.

Highflowed R34 ones from the US....good option www.deatschwerks.com

they are awesome i had a set of them, they were flow tested a 600cc they were all with in 2cc of each other and gave me mo problems what so ever

they are awesome i had a set of them, they were flow tested a 600cc they were all with in 2cc of each other and gave me mo problems what so ever

I just had a look on the site and they look very professional. Are they new OEM injectors that they high flow, pressure test, etc, etc and resell? Is that how it works?

when i got my injectors cleaned i talked to the injector guy about highflows and he said he wouldn't ever touch them, he said he's seen some good ones but on the most part they we all crap different flow rates etc. Your motor your risk.

when i got my injectors cleaned i talked to the injector guy about highflows and he said he wouldn't ever touch them, he said he's seen some good ones but on the most part they we all crap different flow rates etc. Your motor your risk.

thats why when you get them you flow test them :laugh: like i said mine were all within 2cc, if you test them you cant go wrong

Hey hey,

I'm just looking for some names and numbers of people that highflow std R34 rb25 injectors in Brissie. What are some costs and options???

thanks guys,

Steve

why hi-flow std injectors.

you can buy some aftermarket injector for a bit more money than hi-flow std injectors.

much better way to do and brand new too

cheers

thats why when you get them you flow test them :D like i said mine were all within 2cc, if you test them you cant go wrong

Yep, they even have so many cores in stock, they flow test and match a group of 6 so the tolerance between them is very close. I've heard nothing but praise for Deatschwerks, my ones have been running great for a long time now.

They highflow the pintle exactly the same way a manufacturer would, using micron accurate drills an CNC.

yeah i nearly got a set of deathworks highflows as well but read more than a couple of bad reports of injectors failing, locking up on the dyno and sorts. But I suppose bad reports are everywhere for everything

Edited by SevenAngryPenguins
why hi-flow std injectors.

you can buy some aftermarket injector for a bit more money than hi-flow std injectors.

much better way to do and brand new too

cheers

because they are cheaper and made by the same process and are effectively new

Yep, they even have so many cores in stock, they flow test and match a group of 6 so the tolerance between them is very close. I've heard nothing but praise for Deatschwerks, my ones have been running great for a long time now.

They highflow the pintle exactly the same way a manufacturer would, using micron accurate drills an CNC.

dont tell any one else that though...cause when you mention anything besides nismo when it comes to injectors they are apparently shit

I just heard they have arrived at my house... why do work days always go for so long?

I grabbed the 600cc variation of them. they are so cheap for brand new, flow tested & matched, 600cc injectors that are a drop in straight fitment... That has to be as good or better than any aftermarket brand injector, right???

And they only cost $550!

:D

I just heard they have arrived at my house... why do work days always go for so long?

I grabbed the 600cc variation of them. they are so cheap for brand new, flow tested & matched, 600cc injectors that are a drop in straight fitment... That has to be as good or better than any aftermarket brand injector, right???

And they only cost $550!

:(

Don't forget to send your ones back for cash-back!......another $90in your pocket

Don't forget to send your ones back for cash-back!......another $90in your pocket

do they take stock ones off of any one? Or only current customers? i have like 3 sets of RB 25 ones and 2 sets of SR20 ones!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • He obviously had his reason for flipping you off. I wonder what it was...
    • Thats why I stay far, far away from Eastwood. only go there if I wanna eat Korean food 
    • I have to agree like, yesterday, I was driving down the warringah freeway towards the bridge when this jackass driving a beaten up Honda civic cut me off so suddenly it made me almost yank the wheel to avoid him hitting my car. Honestly and he had the NERVE to flip me off (or some other gesture Idk). Im a calm guy, but really some people just dont deserve to have a license, let alone be allowed to drive on densely populated roads/highways. If youre gonna cut through lanes at least use the damn turn signal
    • HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
×
×
  • Create New...