Jump to content
SAU Community

Recommended Posts

Gday fellas,

I'm a new member of the board and im in the market for a R32 GTS-4 5 Speed from prestigemotorsports.com.au

I was wondering since the car is still in japan under auction, I need to find out more details about the car and make sure im 100% happy with it before placing any bids. Im sure some of you have purchased cars through these guys. Through your experience, what kind of things should I be looking out for?

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/
Share on other sites

1) 1989 cars that are almost free theyre so cheap, but will cost twice the repayments just to maintain

2) things that will cost you hundreds or thousands of dollars to rectify once they get here - in order to make the car road legal

3) funny marks in the paint that look like little scrapes but are actually huge gouges in the front bar. especially if it's "pristine and grade 4.

4) anything left in the car for long periods of time on a wharf - it will get broken into and stolen. My advice is to try and ensure that they are taken out of the car until shipping. not all import brokers can / cbf arranging this....

the issue of '89 cars has been discussed a few times - so do a search on it. My opinion is that theyre only an option if you could afford to pay for a mid 90s one anyway. they might look like a lot of bang on a budget - but if you buy a $20,000 gtr, it's not gonna cost the same as a new corrolla to maintain. furthermore - expect to pay for the car several times over in insurance over the first ten years.

89 R32 GTS-4 5 Speed = $7 to 9,--- buy = $3000/year insurance for under 25s.

PM me for any more information.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-454741
Share on other sites

Also if you buy a car in Japan now, and the Government decides to change the ruling from 15 years to 20 years, then ... your farked. I've spoken to a few import people now and they all say that this is more than likely going to happen at some point.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-456586
Share on other sites

nicman, if you are considering using an import broker, ask around - there are a lot of people who have imported cars through PMS and others (myself included).

My advice is to do waay more research than you think you need to - it still wont be enough.

And dont beleive everything you read.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-458736
Share on other sites

Nope,

I cant think of anything worse than having a batch of 15yo 32 Rs on the floor. You've got to realise that a 15yo 32R is going to be a pretty shagged out bit of kit. 26s can generally go 115-120kkm or ten years without needing a freshen up which is rings and bearings bare minimum. Plus the fact that no-one will insure or finance the things. I havent bought a single '89 vehicle (and I can get free lockup storage for as long as I want) even for myself because I honestly believe that the feds will shut the door before its even been opened.

Jash

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-460486
Share on other sites

Having brought my import in myself prior to the changes with a low volume compliance plate, I dont think I would go through the same process (although not available anymore) or the new process again. There is just too much government crap/red tape to wade through. I sent my import approval off to canberra 2.5 weeks before the car arrived, after 2 weeks I rang them up to see if it was processed yet, to which I got the reply no sorry you didnt send in a photocopy of you photo id signed off by a JP. The forms made no mention of it and they werent about to ring me up and tell me I needed to get that in to them. So my car got here sat on the wharf for an extra week getting covered in sea salt and costing me money. Its a long drawn out process and to be honnest you could end up getting a dog. Buy one that has been imported by a yard at least you can see it in real life and drive it before you buy it. Importing yourself you have to pay for the car just by looking at photo's it isnt the best. When it comes to buying an R, I'm gonna try and find one locally.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-460606
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...