Jump to content
SAU Community

Recommended Posts

hi guys,

i had a crd catch can that sat next to my abttery in my previous gtr but not keen on spending another $700 for ths setup!

im running 325awkw & thinking of doing some track days...i was looking at this option:

http://hioctaneracing.com.au/eshop/product...products_id=899

has anyone fitted this in an r32 gtr?

not sure where i would fit it or even if there is room...

thanks

Link to comment
https://www.sau.com.au/forums/topic/215113-best-off-the-shelf-catch-can/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

They are good enough for some of the fastest time attack GTR's in Japan so im sure you would't have a problem.

if its good enough for the japs then it cant be inadequate - funny though i spoke to another shop about this & they told me clearly that they are simply not as good as the remote type (like what u have on your 33 nick)

on top of all this, the shop im referring to only stocks this top mount style so go figure...

The best would be whatever fits the spot you want to put it and works out the cheapest.

There are plenty of generic cans out there for under $100 and they all do the same job.

Personally, i'd get one of the trust copy (drift branded) square cans, take the lid off and add some baffling made from alloy sheet you buy from bunnings, and it will perform as well as any other can you can buy. They have a rubber seal so it's not an issue to take the lid off and replace it.

Unless your car blows all it's oil out of the breathers obviously, then you may want to look for something with a bit more capacity....

I grabbed a beautiful custom alloy one from Racepace in Melbourne for my R33 GTR... It was a catch can and washer bottle in one unit for about $350.

I'm going to see if they make a similar one for the R32 GTR :)

i have one of those greddy ones, autobahn sold it for $90 to me. A mate got one from autobahn down south and he paid $50 on sale!!!! go hit them up for their BEST PRICE if you want a greddy one... problem is no baffles inside and cant open it, i am yet to install mine, gotta take it to work and drill a hole and weld a plug at bottom to put some baffles in.

I grabbed a beautiful custom alloy one from Racepace in Melbourne for my R33 GTR... It was a catch can and washer bottle in one unit for about $350.

I'm going to see if they make a similar one for the R32 GTR :)

what did u pay for the racepace catch can? i'd like to know if they make it for the r32

Here is another worth mentioning, now available at Just Jap.

If I didn't already have a CRD custom tank, I would try one of these:

jjrrb26ctank.jpg

http://justjap.com/store/product.php?produ...=317&page=1

nick - ive spoken to darron @ justjap - they onloy have the type that sits at the back of the rocker cover

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...