Jump to content
SAU Community

Recommended Posts

R32 GTS25 would be the way to go, should handle quite well.

there is a r32 with a na rb25 conversion for sale at the moment are there many of them?i currently have a Nissan pulsar n14 sr20 how will it go against that? also how much do the r32s weight and are they lsd? is there a page somewhere that has all the features

The r32 gts25 was a production car from the factory they weigh high 1300kg i think. cant help you with the lsd or how they go against n14. in my opinion r32 would be quicker.

http://www.skylinesdownunder.com/index.php...0&Itemid=97

that might help

I remeber reading somewhere that N15 SSS's will have the jump on NA R33's but the Skyline will catch up a little down the line..

Quick rundown.

Short answer: R32 - No. NA 2L is poo.. if you can find one with a 2.5L thats not too bad..

If your going to get an NA skyline.. get a 33 or 34..

Down sides..

Small brakes..

Open diffs..

4 stud wheel pattern

Slap a set of coilovers and strut bars and they handle awesomly..

My NA 2.5L R32 GTS4 can keep up with higher powered cars through the twisties without too much hassle.. but you really need to keep the engine revving to get the most out of it. It is possible to have a quick NA through the twisties with the right mods.

If you want a good good handling NA your looking at the wrong place..

NA cars are all about being light weight with awesome handling..

Have a look at:

MX5

AE86

RX7 SII

perhaps an s13

Just a thought..

I remeber reading somewhere that N15 SSS's will have the jump on NA R33's but the Skyline will catch up a little down the line..

Quick rundown.

Short answer: R32 - No. NA 2L is poo.. if you can find one with a 2.5L thats not too bad..

If your going to get an NA skyline.. get a 33 or 34..

Down sides..

Small brakes..

Open diffs..

4 stud wheel pattern

Slap a set of coilovers and strut bars and they handle awesomly..

My NA 2.5L R32 GTS4 can keep up with higher powered cars through the twisties without too much hassle.. but you really need to keep the engine revving to get the most out of it. It is possible to have a quick NA through the twisties with the right mods.

If you want a good good handling NA your looking at the wrong place..

NA cars are all about being light weight with awesome handling..

Have a look at:

MX5

AE86

RX7 SII

perhaps an s13

Just a thought..

could i also suggest a non turbo supra and non turbo 300zx, both these cars will make over 130kw at the wheels, and only weight about 1400kg's give or take

thanx for all the advice and info

id really like a r32 gts25 but im also looking at mr2 sprinta and 300zx im looking for a car that looks nice and goes good for na and drifts can any one giv me some advise on thoes cars or any other cars

R32 GTS25 is my pick, doesnt have VVT which does make a nice topend difference though. Ideally if you can pick up an R32 GTS25 that has already had the very easy to do 3l bottom end conversion, then you can achieve 150rwkw+ with the right mods.

R33 and R34 if you can get a good one for cheap then why not... But ultimately, I wouldnt spend too much on an N/A as a P plater cos you'll eventually get onto the turbo bandwagon later, save the dosh for a turbo car then :D

Z32s are a nice bus, not a fan of the big veee-six however, and no where near as easy to work on if you are inclined that way.

thanx for all the advice and info

id really like a r32 gts25 but im also looking at mr2 sprinta and 300zx im looking for a car that looks nice and goes good for na and drifts can any one giv me some advise on thoes cars or any other cars

If you want to hang your arse out.. dont go for MR2.. incredibly hard to drift.

Again.. if you want to drift, you want the lightst car possible, Sprinter. There are a couple of 4AGE converted ones already and they are a blast to drive!

I see where your comming from with an R32 as a drift car but the NA's have too many down points (in my opinion) to bother with.. no time. Im pretty sure that the NA's have a weaker box too.. and thats something you dont want in adrift car.

How about a KE70?.. It would need work.. but they are quite cheap..

MA70 (is that the right code?) Supra?

Toyota Cressida?

Ghetto Spec R31 boro drift car?

i had a look at a 300zx last nite,drove nice but yes big and heavy,sprinters are sik but there bit old,r32gts25 would be awsome if i could find one wat about r33? they any good i dont really like the look but i could settle for one,ye i read about mr2s being hard 2 drift because of the heavy rear end

  • 2 months later...
  • 1 month later...

If you really want to skid it and not just a passing fancy, jump on the Aus spec R31 bandwagon and don't look back. S13 front sus, locked diff and away you go.

If you want something thats actually nice but still cheap, I'd go NA 33 and if you are cashed, NA Supra.

If you want something NA and fast, get a V8 falcon or commy. Big cam, good free flowing exhaust, some head work and either a big carby or a good EFI system and it should be quick enough to give you a scare or 2.

  • 1 month later...

Hey Mate,

Don't know if you have bought your car yet, but i got an R32 GTS 2.0L, and i have to say it's great.

There are some small downsides though

Small engine capacity means you need to keep the revs up for any decent power.

As for drift yeah a LSD would be nice but hard to source, but great in the wet ;)

handeling: as i only have a standard one at the moment i can only go by a standard setup, which is a fair bit of fun but could be a bit stiffer.

Hope this has helped you a bit..

By the way expect to pay a fair bit nowdays as P platers are only alowed non turbo ones, so they are in high demand..

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
    • I've got three stashed away but it's starting to get silly with the prices 
×
×
  • Create New...