Apexi Power Fc For Rb20

[tin-pain]

hi as the topic states i am wondering what is needed

for a power fc to be plugged into an r32 rb20det which came from an s14 most likely sr20

i got offered my friends pfc and wasnt sure what was needed

or if it is just plug and play

any help would be great and thank you for reading

thanks in advance

[subie]

as far as I know U need the harnesses for RB20DET and that's it, plug and play! then, get it tune for RB20DET engine

my2cent

[tin-pain]

thanks for that subie

is it hard to find the harness and how much on average do they go for

do people sell em seperatly?

[skylinegtts]

instead of starting a new topic, i thought id ask here aswell

more generally.... can u use say any nissan PFC on the rb20 assuming u wire it up correctly if u dont have the plug and play loom?

[tin-pain]

really curious on where to get the looms from and how much they cost

saves the hassle of someone cutting the wires, so at least u can sell again

[subie]

instead of starting a new topic, i thought id ask here aswell

more generally.... can u use say any nissan PFC on the rb20 assuming u wire it up correctly if u dont have the plug and play loom?

I think U can get someone to wire it up, but make sure they do proper job and get all the wiring done.

really curious on where to get the looms from and how much they cost

saves the hassle of someone cutting the wires, so at least u can sell again

to be honest, I don't know... try some vendor who sell Apexi parts here

as I said, I'm not 100% sure about this.. I've talked to someone about getting PFC from another model and make it to work on my RB20det as well and he told me this could be done..

my2cent

[tin-pain]

do u know of any people that sell apexi parts around victoria?

[subie]

do u know of any people that sell apexi parts around victoria?

sorry mate..

try "slide" he the mamber/vendor here on SAU and he sell alot of Jap brand

I end up didn't get PFC and going for remapping stock ecu route (heap cheaper)

Cheers

[limpus]

I don't think it can be done...

I have heard of PFCs for other RBs used on the RB20 but never one from an SR20...

[rad100]

there is a massive thread on here somewere wich talks about the rb26dett pfc going onto a rb20!

thats wat i have done! cost me sweet f all!

works like a treat!

just have to change a few wires on the rb26dett pfc and a tune and off ya go!

cheers

[paulr33]

hi,

you want to use a 4cly, 4 injector driver ECU to suit SR20 controls and mappings on a 6 cyl, 6 injector rb20?

if it can be done, it will be a massive pain in the ass, and youll have to piggyback 2 cylinders and 2 injectors

not worth it imho, get the correct ecu

rb26 pfc on rb20/rb25 is easy as its the same logic, cylinders, injectors, ignition driver, sensors etc