Jump to content
SAU Community

Recommended Posts

phwoar. i reckon ive got about 250, so we might give it a good shake! smash all the hsvs there running 14s.

it sounds like you haven't run your car at WSID before correct?

if so, don't be surprised to get a few 13-14 second time slips before your 250rwkw gets you something like a flat 13 or high 12.

it sounds like you haven't run your car at WSID before correct?

if so, don't be surprised to get a few 13-14 second time slips before your 250rwkw gets you something like a flat 13 or high 12.

youre right. im realistically expecting low 13s, theres a lot of time to lose in the launch i guess.

I had 5 runs on my first time there in a 200sx.

first run was a 14.8

last run was a 13.8

every run I did, I thought, I'll change this next time etc and it kept improving.

lots of fun. espesially the 14.8 run, which was, wheel spin, wheel spin, wheel spin, wheel spin, rev limiter in first, second, wheel spin, wheel spin, wheel spin all the while swinging the rear left to right and back... rev limiter in 2nd, 3rd, bog... then eventually cross the line just hitting the limiter in 3rd.. lol.

lots of fun. espesially the 14.8 run, which was, wheel spin, wheel spin, wheel spin, wheel spin, rev limiter in first, second, wheel spin, wheel spin, wheel spin all the while swinging the rear left to right and back... rev limiter in 2nd, 3rd, bog... then eventually cross the line just hitting the limiter in 3rd.. lol.

haha must have had no traction at all! my car has tons, except when its wet lol. when i launch off the lights i might wheelspin a bit through 1st, little chirp into 2nd then off she goes!

yeh.. it was more to do with nerves and 45 psi in the rear wheels (which were 255/35/17).

I eventually got a 1.9 60" with good controlled launch and 19psi in the rears.

are you using your street tyres?

what are they?

255/40/17 bridgestone potenza streets, id say they are pretty high-end since they were over $400 each. i run around with 36psi, and it says on them "traction - AA" haha.

too bad they only last 15000km.

  • 2 weeks later...

I think its do-able ... 240kw netted me a 12.4 that's with poor clutch and tires... Im confident i could post a very low 12 now.

Sti is fair bit lighter, so with the right driver who isn't nervous on take off should be in lower 12 second bracket.

Edited by Tomek
  • 2 weeks later...

it can be done no worries

i have a mate with a wrx sti 2000 model

239kw at the wheels

12.3 down the quarter ill call him to get the time slip and try and find a scanner at work

wrx's are so expensive to modify as well the power really has to be dragged out of them not like a gtr where u just upgrade turbos

cheers

julz

it can be done no worries

i have a mate with a wrx sti 2000 model

239kw at the wheels

12.3 down the quarter ill call him to get the time slip and try and find a scanner at work

wrx's are so expensive to modify as well the power really has to be dragged out of them not like a gtr where u just upgrade turbos

cheers

julz

how are they more expensive to modify? power fc + td05 (big wheel turbo?) + fuel pump + ebc gets em to 200 + awkw. they dont even need to change injectors till 250awkw..

same mods as gtr's, only gtr turbos cost alot more and gtr's need to upgrade injectors to get descent power/weight figures compared to the wrx

how are they more expensive to modify? power fc + td05 (big wheel turbo?) + fuel pump + ebc gets em to 200 + awkw. they dont even need to change injectors till 250awkw..

same mods as gtr's, only gtr turbos cost alot more and gtr's need to upgrade injectors to get descent power/weight figures compared to the wrx

well he modded his wrx and i modded my gtr and he spent way more to get basically the same power at the wheels

does that make sense

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I've also got a quick jack. I would never get under my car again without using it.  While it might be quicker to use a jack and stands, it is such a quality of life improvement that I wouldn't have it any other way now.  How much slower the quick jack is to setup will be based on your circumstances. Can you leave the jack rails on each side of the garage? Can you leave the hydraulic lines attached? etc.  If you can drive the car into the garage and simply push the jacking rail thingos under the car into place, it is super quick to setup and use. But if you have to pull the pump unit out of storage, attach the hydraulic lines, wheel out the lifting rail thingos.... yeah takes a bit of time. Having said that, I would still prefer that to using a jack and stands lol. 
    • Sydney Tools have them for ~$3400. More than the Quick Lifts but these seem better. https://sydneytools.com.au/product/quickjack-7000tl208240v-5175642-7000lb-110220v-portable-light-duty-truck-and-passenger-car-lift-system  
    • I've seen these as well https://www.ebay.com.au/itm/395822887806?chn=ps&_ul=AU&mkevt=1&mkcid=28&google_free_listing_action=view_item&srsltid=AfmBOooak9PFJJwwNDusr8TrZ5lsminTjComhJr-Z4dJ52Tt35T1hBPl0wk&gQT=1 but always seemed a bit dodgy lol
    • Yeah same with the GTR but in practice that is pretty easy because the car is so high, and the stands only go from sill end to sill end so you don't need to wriggle far
×
×
  • Create New...