Jump to content
SAU Community

Recommended Posts

I took these photos of your "old car" at the 2004 SAU Show 'n Shine...

It looks remarkably similar :)

Although an immaculate example of an everyday R33 GTS-t, I only took one set of bracketed photos of it.

malcolm_2004.jpg

im with you merli.. clean example of a modded 33 gtst.. but i for one have always been under the asumption the skyline GTX was powered by a ca18 in both r32 r33 and r34 models... or was that the GT-Xi... i cant remember either way.

Edited by rb26s13

lol, this thread took a turn for the interesting. :D

even if it is genuine (it sure does have a lot of plates to support that), since it's now quite modded, it's now a bit of a bitsa spec which would reduce it's collectibility. I must say I did notice some of the build plates say 95/1 and some say 93/12. :)

Wow, impressive. I remember how much money you put into your old GTS-25T, and it looked identical to the '2500R'.

In fact I remember when you had the Trust turbo and the Greddy plenum fitted.

What are the odds of finding a 'Genuine' 2500R in Japan, let alone one that looked like your previous cars twin?

HI THERE :)

NOT REALLY THAT IMPRESSIVE AT ALL - ITS NO WONDER YOURE GETTING MUDDLED ABOUT THERE BEING "2 CARS" THAT LOOK SIMILAR BECAUSE THEY ARE BOTH ONE IN THE SAME CAR - NOW I SEE WHERE YOURE COMING FROM - I THOUGHT YOU THOUGHT MY OTHER SKYLINE WAS A KEY FACTOR TO CONSIDER - NOT AT ALL - IT WAS A SERIES 2 PILE OF SHITE !! - THE 2500R "PROTOTYPE" "DEMO CAR" I BOUGHT IS A "TWEAKED" AND "FACELIFTED" GTS-25T - THE ONLY REAL IMPORTANT THING ABOUT THE CAR I HAVE IS THAT IT IS "THE CAR" THAT WAS PULLED OFF THE PRODUCTION LINE AND GIVEN SOME SPECIAL ATTENTION - WHEN I ORIGINALLY GOT IT ALL I KNEW WAS THAT IT WAS THE SECOND OUT OF THREE CARS THAT WERE USED FOR DEVELOPMENT IN THIS WAY - IT CERTAINLY WASNT AS YOU SEE IT TODAY - THERE WERE BITS MISSING AND BITS ON IT THAT HAD TO GO - IT HAD TOO MANY MIX MATCHED THEMES THAT WERENT WORKING HARMONIOUSLY TOGETHER - WHAT WAS WORKING WELL WAS THE FACT THAT GT-R PARTS WOULD EASILY AND READILY BE UTILISED - A GT-R INTAKE PLENUM WAS STILL IN THE BOOT WITH ASSORTED ADAPTER SHIMS AND GASKETS ALONG WITH A HAND WRITTEN LIST IN JAPANESE ON NISMO LETTERHEAD OF OTHER GT-R PARTS EARMARKED FOR INSTALLATION - IT HAD THE RIGHT BLOCK FOR THE CHASSIS (I HAD THAT CHECKED WITH NISSAN IN JAPAN) AND ALL THE CORRESPONDING ID PLATES ALSO MATCHED THOSE NUMBERS WHICH HELPED - NOW THE ODDS OF FINDING A "GENUINE 2500R" IN JAPAN WELL THAT WOULD BE IMPOSSIBLE AS THEY NEVER WENT INTO PRODUCTION - AS POINTED OUT IN THE HPI ARTICLE THERE IS NO DEFINITIVE MOULD TO PLACE OVER ANY OF THIS OTHER THAN THE CARS WERE BEING USED AS DEVELOPMENT TOOLS WHICH IN ITSELF IS VERY OPEN ENDED - THE CARS WOULD HAVE ALL GONE THROUGH MANY MANY DIFFERENT CONFIGURATIONS DURING THEIR 2 YEAR TOUR OF DUTY - HOW DIFFERENT IS THE NEW GTR IN RELATION TO THE PROTOTYPE THAT WAS BEING SHOWN 5 YEARS AGO - WITH ALL THE INFORMATION I HAVE BEEN ABLE TO SOURCE OVER THE PAST 7 YEARS I KNOW THAT WHAT HAS "EMERGED" IN MY CAR IS A SOLID REPRESENTATION OF THE DIRECTION THAT WAS BEING FOLLOWED IN JAPAN HAD THE 2500R BEEN REALISED AS A STABLE MATE OF THE 400R AND BEEN "AWARDED" MASS PRODUCTION HOMOLOGATION - IT WASNT TO BE WHICH IN MY MIND IS OF NO CONSEQUENCE AS NOT EVERY IDEA EVER THOUGHT OF GETS SEEN THROUGH TO THE END - THE PLENUM AND TURBOCHARGER ARE JUST 2 ADDITIONS FROM A VERY LONG LIST OF DOZENS AND DOZENS THAT HAVE BEEN THOUGHTFULLY APPLIED OVER THE YEARS - ALTHOUGH SAYING THAT A LOT OF THE DECISION MAKING PROCESS DICTATES ITSELF ESPECIALLY WHEN FROM THE OUTSET THE INTEGRITY OF A "FACTORY SPEC. LOOK" WAS SERIOUSLY ADOPTED AND ADHERED TO - THE INTERESTING THING TO NOTE IS THAT NO ONE WILL EVER KNOW EXACTLY THE "GTX-1 2500R" BECAUSE IT NEVER ACTUALLY HAPPENED - OF 3 ATTEMPTS 1 REMAINS AS TESTIMONY TO WHAT "NEARLY DID" "ALMOST WAS" AND "COULD HAVE BEEN" - KEPT ME OUT OF THE PUB FOR ALMOST A DECADE TOO WHICH CANT HAVE BEEN A BAD THING !! - LATERS - ALL THE BEST - MALCOLM :D

i always wondered why nismo and or Trust would allow a GReddy part to be on one of their proto-types with a Nismo badge on it.

one question...is the car at the S n S and the car in HPI the same car?

Edited by DiRTgarage
i always wondered why nismo and or Trust would allow a GReddy part to be on one of their proto-types with a Nismo badge on it.

one question...is the car at the S n S and the car in HPI the same car?

Nismo does not fit Trust turbos to their vehicles, but thats just the start.

HI THERE :)

NOT REALLY THAT IMPRESSIVE AT ALL - ITS NO WONDER YOURE GETTING MUDDLED ABOUT THERE BEING "2 CARS" THAT LOOK SIMILAR BECAUSE THEY ARE BOTH ONE IN THE SAME CAR - NOW I SEE WHERE YOURE COMING FROM - I THOUGHT YOU THOUGHT MY OTHER SKYLINE WAS A KEY FACTOR TO CONSIDER - NOT AT ALL - IT WAS A SERIES 2 PILE OF SHITE !! - THE 2500R "PROTOTYPE" "DEMO CAR" I BOUGHT IS A "TWEAKED" AND "FACELIFTED" GTS-25T - THE ONLY REAL IMPORTANT THING ABOUT THE CAR I HAVE IS THAT IT IS "THE CAR" THAT WAS PULLED OFF THE PRODUCTION LINE AND GIVEN SOME SPECIAL ATTENTION - WHEN I ORIGINALLY GOT IT ALL I KNEW WAS THAT IT WAS THE SECOND OUT OF THREE CARS THAT WERE USED FOR DEVELOPMENT IN THIS WAY - IT CERTAINLY WASNT AS YOU SEE IT TODAY - THERE WERE BITS MISSING AND BITS ON IT THAT HAD TO GO - IT HAD TOO MANY MIX MATCHED THEMES THAT WERENT WORKING HARMONIOUSLY TOGETHER - WHAT WAS WORKING WELL WAS THE FACT THAT GT-R PARTS WOULD EASILY AND READILY BE UTILISED - A GT-R INTAKE PLENUM WAS STILL IN THE BOOT WITH ASSORTED ADAPTER SHIMS AND GASKETS ALONG WITH A HAND WRITTEN LIST IN JAPANESE ON NISMO LETTERHEAD OF OTHER GT-R PARTS EARMARKED FOR INSTALLATION - IT HAD THE RIGHT BLOCK FOR THE CHASSIS (I HAD THAT CHECKED WITH NISSAN IN JAPAN) AND ALL THE CORRESPONDING ID PLATES ALSO MATCHED THOSE NUMBERS WHICH HELPED - NOW THE ODDS OF FINDING A "GENUINE 2500R" IN JAPAN WELL THAT WOULD BE IMPOSSIBLE AS THEY NEVER WENT INTO PRODUCTION - AS POINTED OUT IN THE HPI ARTICLE THERE IS NO DEFINITIVE MOULD TO PLACE OVER ANY OF THIS OTHER THAN THE CARS WERE BEING USED AS DEVELOPMENT TOOLS WHICH IN ITSELF IS VERY OPEN ENDED - THE CARS WOULD HAVE ALL GONE THROUGH MANY MANY DIFFERENT CONFIGURATIONS DURING THEIR 2 YEAR TOUR OF DUTY - HOW DIFFERENT IS THE NEW GTR IN RELATION TO THE PROTOTYPE THAT WAS BEING SHOWN 5 YEARS AGO - WITH ALL THE INFORMATION I HAVE BEEN ABLE TO SOURCE OVER THE PAST 7 YEARS I KNOW THAT WHAT HAS "EMERGED" IN MY CAR IS A SOLID REPRESENTATION OF THE DIRECTION THAT WAS BEING FOLLOWED IN JAPAN HAD THE 2500R BEEN REALISED AS A STABLE MATE OF THE 400R AND BEEN "AWARDED" MASS PRODUCTION HOMOLOGATION - IT WASNT TO BE WHICH IN MY MIND IS OF NO CONSEQUENCE AS NOT EVERY IDEA EVER THOUGHT OF GETS SEEN THROUGH TO THE END - THE PLENUM AND TURBOCHARGER ARE JUST 2 ADDITIONS FROM A VERY LONG LIST OF DOZENS AND DOZENS THAT HAVE BEEN THOUGHTFULLY APPLIED OVER THE YEARS - ALTHOUGH SAYING THAT A LOT OF THE DECISION MAKING PROCESS DICTATES ITSELF ESPECIALLY WHEN FROM THE OUTSET THE INTEGRITY OF A "FACTORY SPEC. LOOK" WAS SERIOUSLY ADOPTED AND ADHERED TO - THE INTERESTING THING TO NOTE IS THAT NO ONE WILL EVER KNOW EXACTLY THE "GTX-1 2500R" BECAUSE IT NEVER ACTUALLY HAPPENED - OF 3 ATTEMPTS 1 REMAINS AS TESTIMONY TO WHAT "NEARLY DID" "ALMOST WAS" AND "COULD HAVE BEEN" - KEPT ME OUT OF THE PUB FOR ALMOST A DECADE TOO WHICH CANT HAVE BEEN A BAD THING !! - LATERS - ALL THE BEST - MALCOLM :D

Please, turn caps lock off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
    • It's more like on average the things I see a lot of things going wrong. Yes, usually the people who reach out are the ones who are having problems but on average it feels like mechanics and tuners here aren't really competent. I swing between thinking my standards are just way too high and wondering whether people really are just this dumb. I just had the strangest 10+ reply argument on a Facebook group over someone insisting that the factory R34 GTT boost control solenoid reduces boost pressure to 5 psi when it's on and raises boost pressure to 7 psi when it's off despite showing the exact plumbing in the factory service manual and the solenoid behavior detailed in the FSM.
×
×
  • Create New...