Jump to content
SAU Community

Recommended Posts

Okay so the more i read in the Modification Forum the more confused i am...

so im just gonna ask the masters to give me a hand...

okay ive got a stock R33 Series 2, auto, with the only mod being a HKS air pod...

what mod should i do first to improve the performance, but still legal and dont have to top up my tank every second day?

also what is a good exhaust thats good and not HEAPS loud?

and secondly, what is SMIC or FMIC?

Thanks so much!

Link to comment
https://www.sau.com.au/forums/topic/215883-car-modification/
Share on other sites

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

The biggest improvements you can make for little money are:

Turbo back exhaust

Front mount intercooler (FMIC)

Fuel pump

Decent set of tires and a wheel alignment

These are the first basig mods you can do.

SMIC = Side mount intercooler

FMIC = front mount intercooler

SMIC = side mount intercooler

First mod would be to ground the black wire to the boost solenoid located on your strut tower

For an exhaust? Give Justin at Everlast a call to see what he has lying around.

I got my hi flo 3" system fitted for $650 all up and that was a BIG improvement.

:thumbsup:

ok

FEW THINGS

go see Mike at MV Automatics in Blackwood, get the auto box serviced and a shift kit installed.

much better shifts for the auto

go find a decent FMIC and install it yourself, so far there goes a grand for the above 2 mods

get a decent cat back system, a hiflow cat converter, and a 3" dump pipe from turbo to cat converter, there's another grand

put in a $50 boost bleed valve, get a Apexi SAFC, take it to a dyno tuner, get it installed, the car serviced with 0.8mm sparkies, boost raised to 10psi, and dyno tuned. theres another grand

so far 3g and youve got a quick shifting auto box, plenty of cool air feed, good free flowing exhaust, freshly serviced engine, slightly tuned with the safc and say around 175rwkw.

yeah mate do the basics first....it will cost you a bit but gives a good ground to work from in the near future.....get a full exhaust system......high flow dump pipe or aftermarket dump pipe with a highflow cat and 3" system all the way through....what you put on at the end is your choice......then get a front mount intercooler for $650-700 from autobarn a good Greddy kit.....they are good value for money...and there you go for about 2K you have a nice sounding and free flowing exhaust and a nice cooling system as well.......

If you wanna go harder then get a full service as tangles said.....bosch 040 or a nismo GTR fuel pump and an electronic boost controller.....with those mods and a service you could easily run 10-12 psi through it and get some decent power mate.....

goodluck with it all

go see Mike at MV Automatics in Blackwood, get the auto box serviced and a shift kit installed.

much better shifts for the auto

Much better shifts FOR the auto, not FROM the auto ... so its better for the trans then? Not so much a better response FROM the trans?

I've got an auto and wouldn't mind looking after the auto box, but still wanna wind out about 180-200kw

Thanks guys!!!

um out of curiosity, one of my mates tell me to do a manual conversion.

Is that a good idea?

Mechanically, would that break the car in any way?

um, no, not break, just completely changes from auto to manual....

not sure on a 33 price, but when i looked into it for my s13 it was gonna be cheap at 1400ish, so id say around 2000-2500 for 33.

Edited by Damo_R34
Much better shifts FOR the auto, not FROM the auto ... so its better for the trans then? Not so much a better response FROM the trans?

I've got an auto and wouldn't mind looking after the auto box, but still wanna wind out about 180-200kw

You could also get a transcooler....... I will be getting a shift kit and cooler once i put my FMIC on!!

i wont be doing a manual conversion if i were you....but then again depends on what you like to drive auto or manual.....auto's are just as fun and just as good to drive as a manual.....and trust me they are good for city driving....i have a HD clutch and going through peak hour or a busy sat nite.....my god my left calf is bigger then my right

yeah it depends on the application.

if you want to drift like everyone thinks skylines/imports are for then manual.

but for comfort, and if you want to take it on the strip etc, worked auto is alot better.

one of my mates has got a blown v8 ute, every second person asks why its auto, but with slicks and a full custom auto box from mv that thing launches like you wouldnt believe, puts all the manual lovers in their place.

Edited by ted180

Brendan i think you were being a bit conservative with 175rwkw with the mods you listed i would thing a mid 190rwkw

on my standard turbo standard ecu with FCD i made 185awkw @ 14psi i would think 10psi on rwd would be similar

1. Buy the cheapest intercooler core off ebay - 600x300x76 with 3" in/outlets.

2. Get a custom made exhaust and intercooler piping at the same place.

3. Buy a boost controller (preferably electronic) - boost it UP TO 12psi (would go more on stock turbo if u want it to be reliable)

4. Tune

5. Enjoy it for week...maybe 2 before u want more power.

Whilst others here have listed very good advice I think they missed the most important stuff.

To go fast in a Skyline you need stickers. Preferably Mines or Nismo but HKS & GReddy will do.

Next get some neons under the front bar, side skirts and rear bar and you will see your car pull out 2 lengths over a non-neoned WRX regardless of what engine mods it has.

Finally you need an amp and bass. Doof = db = killa whats... as in "What the f__k was that eh?"

After you have these things you need some 19" chrome rims with spinners.

***Disclaimer: It is late and I'm bored waiting to see if my off peak download time has been uncapped. You have plenty of good advice in the posts above***

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...