Changing The Headlamp Bulkbs In A '05 Cv35 - Halagen Fog Lamps, And Parkers

[CV35]

hey guys,

can someone point me in the direction of a tutorial or something that shows me how to replace the light bulbs in the front helpamps?

[NISMO]

Hi Julian,

There are 2 ways you can do it.

1. Take off the front wheels, take off the guards behind the wheels and this gives you access to the bulbs.

2. Take off the front bumper, unscrew the lights and there you have it.

There are tutorials on G35Driver, but it'll pretty much say the above in a little more detail :-)

I use method 2 simply cause I have taken off the bumper that many times that I can now get the lights out in under 10 minutes.

There approx 7/8 screws under the front of the bumper which are a phillips head or 10mm socket.

Next put your hand in and undo the side blinkers

Above the blinkers there are 2 phillips head screws on each side

Undo the push down fasteners at the top of the grill (Open the bonnet to get access)

And it's off. The lights are another 4 screws on each one.

It does sound long but for me it means the lights are out, in my hands and easy to access any part of them.

Hope that helps.

Bobby

[CV35]

thanks Bobby, geez, all that just to change a couple of bulbs!?

I have an aftermarket bumper (Impul), would that change anything?

[NISMO]

It Shouldn't mate.

Usually the mounts on aftermarket bumpers should be the same.

The above was for a coupe as well. Not sure if it's the same on a sedan.

[GEXer]

The above was for a coupe as well. Not sure if it's the same on a sedan.

even easier on sedan i think, u dont even need to take the front bumper off...