Jump to content
SAU Community

:( Wont Start!

chrissyo

By chrissyo,
in General Maintenance

 Share

Recommended Posts

chrissyo Collaborator

chrissyo

Posted
Posted

Hey guys, recently my r33 gtst series 2 has started to stuggle a lil on cold starts. Revs fluctuate a bit but it sorts out and idols fine then all is good :)

Ive also noticed that the last week or so ive been getting exhaust soot on my rear bar? im not sure if this is all related or what

Tonight i went to go out, car started stuggled a lil like it has been but was then fine, drove around the cauldersack before the car started to jolt and stall! :down:

Now when i try to start it the engine cranks over revs to about 1100rpm then cuts out. Sometimes it will rev a bit /\/\/\/ but then cut out still?

Im not sure what the problem is :) tried searching but couldnt find a similar problem.

Please help guys

Link to comment
https://www.sau.com.au/forums/topic/216309-wont-start/
Share on other sites
chrissyo Collaborator

chrissyo

Posted
  • Author
Posted

no need to reply! got it running this morning, somethings up with the AFM. About 6 weeks ago i re did the dry solder joints and its been running fine ever since.

This morning i disconneceted it and the car started fine first go :down: pluged it back it and now its working??? not sure if it just wasnt plugged in properly at first or not?

i imagine if that was the case it still woulda started though(considering it started when i took it out!!!) Will just have to keep an eye on it.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/216309-wont-start/#findComment-3821771
Share on other sites
chrissyo Collaborator

chrissyo

Posted
  • Author
Posted (edited)

Ok so car is not good as i thought! wont go, starts drives a bit and revs are just all over the show.

I redid al the solder joints about 6weeks ago? ive just taken it out and im looking at it atm and it looks fine. all the joints are nice as!

what else could it be? spark plugs? :s sorry im a newbie

Cars now starting without the AFM in it...but try driving and it jolts when u get anywhere near 2000rpm

Edited by chrissyo
Link to comment
https://www.sau.com.au/forums/topic/216309-wont-start/#findComment-3822103
Share on other sites
chrissyo Collaborator

chrissyo

Posted
  • Author
Posted

do others agree with b1 mr fanny?

i need to get some contact cleaner 2moro. The car actually gets to about 2500 before it starts to 'misfire' not sure wat word to use for it. So is that how it works? when the afm isnt in the car can start but not rev over X? it starts fine without the afm everytime. starts with the afm just struggles more but in both cases u cant rev over 2500

Link to comment
https://www.sau.com.au/forums/topic/216309-wont-start/#findComment-3822365
Share on other sites
chrissyo Collaborator

chrissyo

Posted
  • Author
Posted

Wells just thought id let everyone know that i gave my AFM another clean! redid all the solder joints again. this time it seemed to actually work!

cars now running better than ever in some ways atleast :cheers:

With the afm back in its starting fine! Not sure if anyone saw my other thread but ive had troubles with the car backfiring over 5000rpm....afm fixed that. :)

Link to comment
https://www.sau.com.au/forums/topic/216309-wont-start/#findComment-3823820
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
    • GTSBoy
      Neil's R33 Gts-t Build

      By GTSBoy · Posted

      Well, no. It's an 023, which is pretty similar to an 040. Although it is hard to tell from the specs, as given.
    • GTSBoy
      My R32 Money Pit & The Headaches That Come With It

      By GTSBoy · Posted

      Hmm. Maybe the (other thing I forgot about!) Haltech removes at least some, if not all, of the problem I described. I guess there is still the possibility of getting it wrong if the AC is set up/wired up for the Haltech as if it was in an R34 (simply because it's on a Neo), and that's playing foul with the R32 AC computer.
    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      Glad it eventually came out Duncan!   I believe that might be 040. 044 is the inline pump, so has screw fittings in and out. 040 is more just drop it in fuel and the bottom is "open" (mesh) from my memory 
×
×
  • Create New...