Jump to content
SAU Community

Recommended Posts

Hi Guys,

I have a problem with my stereo, i recently reinstalled my stereo. The issue I have is that when the stereo is connected and I switch the headlights on it pops the fuse that controls the headlights. It obviously seems to be short circuiting.

Another problem with the system: which consists of an amp and sub, is that when i change songs or adjust anything on the cd player the sub makes a big thumping sound. The connection of the grounding wire is very oversized and the connection is not the greatest - not sure if this is the main problem.

Have you guys got any ideas on what could be causing this problem?

Thanks in advance.

I have a problem with my stereo, i recently reinstalled my stereo. The issue I have is that when the stereo is connected and I switch the headlights on it pops the fuse that controls the headlights. It obviously seems to be short circuiting.

There is an illumination wire which i think is black with a yellow stripe. If you have wired this incorrectly, it would cause the problem you are describing.

Depending on your head unit, it may not need this wire, in which case you need to tape it up so it doesnt short. I know of someone who thought being a black wire, it was a ground, and wired it up to the head unit. There actually isnt any ground wire from the wiring loom, you need to ground your head unit by running a wire to the chassis.

Thanks for the reply trav33.

The cd player was working fine for quite a while before this problem. What happened is that the battery terminals were connected back to front. This cause part of my alarm to fry and the fuse on the back of the cd player blew. Before that episode system was working faultlessly. The things i have done is take out the sub and amp and put them back in.

I was also refering to the ground on the amp end.

Cheers :down:

What happened is that the battery terminals were connected back to front.

That could be your problem there!

So if you disconnect your CD Player Head Unit, you can turn your head lights on and they don't short out?

  • 1 month later...
That could be your problem there!

So if you disconnect your CD Player Head Unit, you can turn your head lights on and they don't short out?

Sorry bout the late reply.

Ive disconnected the cd player for now. My mate thinks it might have something to do with how the earth is wired up. He said to ground it instead of using the grounding wire, if that makes sense.

I havnt had an oppurtunity to do this yet. Though it was working fine how it wired up before the battery incident.

Cheers

D

He said to ground it instead of using the grounding wire, if that makes sense.

There is no such thing as a ground wire (in the standard factory loom).

The black wire which some people think is a grounding wire, is the illumination wire. I'm 99% sure you are using this wire as your ground which is the problem! Do what ya mate said and it'll be fixed.

There is no such thing as a ground wire (in the standard factory loom).

The black wire which some people think is a grounding wire, is the illumination wire. I'm 99% sure you are using this wire as your ground which is the problem! Do what ya mate said and it'll be fixed.

:(

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
    • Running rich in conditions where it shouldn't probably won't do great things for catalytic converter lifespan. I would fix that sooner than later.
×
×
  • Create New...