Jump to content
SAU Community

Recommended Posts

I got pulled over and got put straight into the pits, u can clear the defect notice on a front mount on a defect notice, but not me coz mine is on a epa notice...The guy that i had to take it to said he cant clear it (which was a full inspection at one of the two stations granville or ctown) n i would have to go to emissions at botany..

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

so there is absolutely no chance that my front mount will pass the blue slip? even if everything else is standard...exhaust, air filter, bov (which is what i got done for)

anyone here passed a blue slip with a frount mount on?

Why couldnt you pass with a front mount with stock return pipes? Thats legal.. however it needs to retain the stock reo bar which most often than not needs to be trimmed to fit the FMIC..

If you have had to drill holes etc then your screwed, you wont pass unless you weld up the hold or I guess rivet a covser on (not sure if that will pass) and then stick a smic on.

Simply put as long as you haven't cut the hole in the structual part of the guard and the reo is in original condition it will pass. If you have cut into the structual part of the guard (under the seam weld I think) then you will be required to reinforce/strengthen before being passed. Engineers base their reports on these requirements. I have the exact ADR on my certificate but need to find it again!

the reo has not been modified, as for the structural part of the guard, i'll post photos in about 1 hour.... also can these defects get extensions? i doubt i can have everything ready (full time job and all plus technically i only got 11 days due to long weekend) :down: , like i think id have to change the cat, front/dump pipe, exhaust, intercooler, bov and pod (the last 2 have been taken care of and the exhaust isnt a problem, cat and everything ive got the stock bits, except the front/dump pipe) my only big worry now is the intercooler and where holes have been drilled 1 hole comes out from the inner gaurd area infront of the wheel (is this the stock hole?) and the other hole is on the other side anyway i'll post photos soon

Edited by DaGr81

they have everyright to charge you for your plate being dirty. its more of a visibilty issue then the number plate actually being dirty.

its just like the posistion of your niumber palte can get you a fine cause its not compelte;y visible

ok the first photo is the passengers side area (near the wheel well) and the second one is on the drivers side, cuts in just underneath the water bottle

let me know if its legal or not, theres alot riding on this :S

post-15281-1209467924_thumb.jpg

post-15281-1209467941_thumb.jpg

Edited by DaGr81

hey guys im going to be doing most of the running around for this tomorrow, about the only other thing i need to know is whether my split front/dump pipe needs to be a stocker as well, so far these parts will be going on tomorrow (air box sorted, bov now standard, cat and cat back now standard as well) so pretty much back to stock except the front pipe and intercooler, hopefully my intercooler will be ok for it and maybe i can cover the split front pipe with exhaust wrap.... what do you reckon?

Its an opinion f**kstick.

Not necessary. Warning issued.

lol its been empty for 2 years hehehe (im just gonna take it out this sunday) save the hassels, i dont have a problem with the defects its just the dirty number plate fine really!

I believe being empty or not there is also a defect.

Yeah, an uninformed opinion that costs poeple money. f**k you too.

Not necessary. Warning issued.

Hi there :thumbsup:

Sounds to me that youre saying that a "full inspection" is a bad thing ?!

If your car is second hand and has been owned by somebody else how do you know that prior to you buying it the previous owner did something to it that could potentially make it dangerous or unsafe ?

If youre satisified that this isnt the case and youve done everything yourself to ensure that its ok well youve got nothing to worry about.

Isnt having a defect free car thats safe for you to drive and safe for other motorists a good thing ?

I think so !

Cheers malcolm ;)

I disagree. I think the rules that are in place are far too harsh and unreasonable.

whre is the pIcture of this dirty plate :P

Yeah I am interested to see it too.

hey guys im going to be doing most of the running around for this tomorrow, about the only other thing i need to know is whether my split front/dump pipe needs to be a stocker as well, so far these parts will be going on tomorrow (air box sorted, bov now standard, cat and cat back now standard as well) so pretty much back to stock except the front pipe and intercooler, hopefully my intercooler will be ok for it and maybe i can cover the split front pipe with exhaust wrap.... what do you reckon?

I doubt the split dump will be an issue.

Damn that sucks! Dirty Numberplate WTF!

I wonder if they ever pull the people over with their old yellow numberplates that have for example # "10."

Plenty of these I've seen so faded you cant even read them. Never mind the shitty old ones you see on 20+ year old cars you never see anything done about.

I got a $185 parker fine for parking within 10m from an intersection.

The council's got the 'No Stopping' Sign in every other directions except this corner

So I'll be taking it to court on the basis of inconsistent road signs.

I was done for "parking against the flow of traffic" in a maccas car-park - $80 fine, a few years ago, it arrived in the mail I never saw the cop or whoever issued the fine. I was only there for 5mins tops... I was in my dads car at the time, he was like WTF? So now everytime I see someone parked 'against the flow of traffic' ie the wrong way I hope that they get fined too :yes:

as for the dirty numberplate & defects, you're just gunna have to live with it, what shits me in NSW is that we have yearly rego checks n stuff and are still issued with defect notices, however in the other states, they have RWC (with sales and infringments only) and no yearly inspections. We pay thru the ass for rego and its obvious the $$ isnt being spent on our roads.

The old RTA issued yellow number plates where made with the first series of unleaded yellow (bright colours required high levels of lead) the exhaust fumes from cars over time faded the dodgy paint and this is why they are now rooted.

It is the RTA who is to blame for that, they should issue new ones when they found the fault.

lol its been empty for 2 years hehehe (im just gonna take it out this sunday) save the hassels, i dont have a problem with the defects its just the dirty number plate fine really!

I wouldn't do this either - ADRs state that you must have winscreen washers, so if they're not working you can be defected for that too...

The actual rego fees are not very much. It's the greenslip that is the killer and the calculations used to work out what we pay are kept secret from us. One thing is for sure - no greenslip money goes to, or was ever intended to go to, roads.

Whats the go with these stupid warnings? So what if I called someone a f**kstick. Did they complain to you? I don't care if he insults me back. Water off a ducks back as far as I am concerned.

Why would he have a pic anyway? If he is smart he would have cleaned the plate straight away (and then taken a pic saying this is how it was!)

Whats the go with these stupid warnings? So what if I called someone a f**kstick. Did they complain to you? I don't care if he insults me back. Water off a ducks back as far as I am concerned.

Why would he have a pic anyway? If he is smart he would have cleaned the plate straight away (and then taken a pic saying this is how it was!)

A lot of people around here are sick of that kind of thing. You can call your mates that if they approve or you can use it anger elsewhere if you think it's appropriate but here we are sick of the rudeness.

i dont know about you guys but there is no way im posting my numberplate up here, so that every cop that surfs this website can memorise it? and pick on me? no thanks :)

Fair call mate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dragging some reo behind a ute or trailer will smooth out a dirt road, I've used reo a few times to do unsealed road maintenance when we didn't have any plant available  It's best done when the dirt is wet though, and then you just let it dry out for a day to harden up For wetting the dirt I've used some 44 gal drums in a ute or trailer, and a water pump connected to a hose with a old sprinkler tied to the reo to wet the material down whilst spreading Basically just drive slowly up and down the road a few times dragging a few sheets of reo wired together with the sprinkler wetting it all down as you go
    • I did a motokhana years ago with ??Sydney Sporting Car Club???, it was on a grassy paddock and was heaps of fun, I think it was north west Sydney IIRC The old R33 boat was covered in grass and dirt, but nothing that a good wash and detail didn't fix And thinking back, when SAU did the airstrip run in Goulburn years ago, where the old 33 won highest RWD MPH, the quickest RWD ET on the airstrip, and best paint IIRC (before the runs down the airstrip) the damage to the rear quarters from stones flicking up required them the get a respray  I would definitely do a grass motokhana again in the MX5 Who knows someone that owns a farm with a big empty paddock  Liability these days is a big issue though
    • No intention of driving the car the way it's set up now, just wanting to make sure I haven't made any mistakes along the way so that the tune can go smoothly, I don't want to waste anyone's time with stupid issues. And of course I intend to get it towed to the dyno in a completed state 😅 I have the base fuel pressure with the vacuum disconnected set at about 40psi, which I believe is at least relatively close to stock fuel pressure, maybe I'll have a fiddle with the reg and see what happens. For all I know I could be wasting my time with this and I should just plumb it in and see what the tuner reckons. I just find it a bit strange that it seems to be under so much load just free revving, but maybe that's just a result of the turbo slowing down the exhaust gasses and making a restriction in the flow, with no boost to compensate.
    • The boy just hit up google translate and it worked a treat, he said step one was "please urinate with precision and elegance", he then sent me the correct translation  I get some new loctite for the small fixtures tomorrow and get some "dort" going after that 🤣
    • Right, so is the fuel pressure the same as it was previously? If not, well, it's not going to work well. I can understand the theory I assume you are going for, which is: "Run it N/A, and if I have the original AFM, and same amount of fuel and intake air as previously, the fact there's a turbo in my exhaust should still make it run" Which it... might? Provided you don't actually change how much air or fuel is going into the car.. or getting out. But if you have changed that, all bets are off. What is the purpose to even have the car run this way? To get it to a tuner? And if the goal is to limp it to a tuner, you're still going to what - plumb up a whole intercooler system and new intake in the parking lot out front before your tune......?
×
×
  • Create New...