Jump to content
SAU Community

Recommended Posts

Hi all

friends i have bad problem naw my rb25det build boost in nutral gear with stoped car

i heard that RICH & RETARD so i changed AIRflow METER 4 times and the mechanic changed the cas

3 times but still same thing can you help me pleas my car stoped i can`t drive it :)

Link to comment
https://www.sau.com.au/forums/topic/216461-rr-problem-without-solution/
Share on other sites

Hi all

friends i have bad problem naw my rb25det build boost in nutral gear with stoped car

i heard that RICH & RETARD so i changed AIRflow METER 4 times and the mechanic changed the cas

3 times but still same thing can you help me pleas my car stoped i can`t drive it :)

its also hisitating when driving

Hi dears

i did all this staff till now and about diagnostics i dont have tool

i changed maf 4 times all same result

i changed cas 3 times all same result

i tryed it without intercooler like direct its littel bit ok but small stuk from 5.5k to 6.5k rpm

and today we will try another turbocharger because some garage said if its littil crap will do same problem

so guys if some one have same this damin problem give us some help :thumbsup:

finally i am thinking that could be ignetion coils !!!!! :(

what mods are u running?

crook w/g actuator?

have u done a diagnostic? try resetting the ecu properly(shorting the 2 pins in the plug method)

dear am using stock turbo with stock wastegate but before i changed it i hade rb20det w/g

to gaine 10 psi

this thing start when i put new greedy front intercooler

I think your timing is off, is it being correctly adjusted AFTER you've been changing over the CAS sensors?

There isnt many things that will cause boost buildup in neutral and timing is the big one

Or the gauge could be faulty, put a decent one on there or are you using the stocker? (dont trust the stock one)

UltimateGTR - nothing to do with actutors etc... its not under load in idle plus the gate is closed on idle normally anyhow, so its gotta be fuel related, ie before turbo

I think your timing is off, is it being correctly adjusted AFTER you've been changing over the CAS sensors?

There isnt many things that will cause boost buildup in neutral and timing is the big one

Or the gauge could be faulty, put a decent one on there or are you using the stocker? (dont trust the stock one)

UltimateGTR - nothing to do with actutors etc... its not under load in idle plus the gate is closed on idle normally anyhow, so its gotta be fuel related, ie before turbo

no man when we changed the cas we adjust the timing by timing light

even i changed ecu with good one also i changed the coils all do same problem

but when we retaind factory intake manifold problem hapen in 5.5 to 6k

but really how could boost come up like antilage in nutral :banana:

i belive its ignition but where i don`t know

  • 2 weeks later...
When the timing is set, is the cas near the centre? Your harmonic balancer may have slipped, and your setting the timing very retarded.

yes brother its in center and with timing gun i got like 12 - 13 degres

all my mods now 3 inch exhust and pod filter with greddy intercooler front mont

and gtr fuel pump also i changed the plugs

yestarday we changed the three wires all long from MAF to ecu and the car runs good

but still i have loosing power in 3rd 4rth gear :P

by the way i am going to buy power fc ecu do you agrre with me ? that it will help me too much

and thanks all for help

What you mean the problem happened @ 5500rpm/6000rpm with the factory plenum?

What other parts are changed?

Full listing please

its noticable loss of power that somthing hold your car moments

and my mods are 3 exhust pod filter intercooler gtr fuel pump thats all now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...