Jump to content
SAU Community

Automotive Related Tafe Courses/apprenticeships

R-SPEC

By R-SPEC,
in Victoria

 Share

Recommended Posts

R-SPEC Grand Master

R-SPEC

Posted
Posted

Hello

after wasting 3 years of my life at uni i've decided to finally quit.

so i'm now searching for a new career, still in the automotive industry but more of a hands-on type of thing as the suit and tie crap just isn't for me.

i'm just curious to see if there's any people here doing short/tafe courses or apprenticeships etc

is there any good sites where can do a search?

any help/advice would be appreciated

thanks :(

Link to comment
Share on other sites
Jezza-gtR Mentor

Jezza-gtR

Posted
Posted

Hey mate, I'm currently doing a certificate 3 in automotive light vehicle at Kangan Batman Tafe in richmond. But I'm 17 :blush:

Apprentice wages are horrible, and from what I've gathered fully qualified ain't that much better either. If you start in the trade can you live on 230-260 a week?

And there are lots of areas in the trade which is a good thing. If you wanted to do R&R (refit & and replace) a dealership would be good, modern cars, not to much hassle and good equipment. Smaller local workshops tend to not have the high range equipment and its allot harder work imo. I've worked in both types.

But if you have a good passion for cars and can listen and have patience then that is the best way in the trade. I've seen so many other apprentices who are just sh*t kickers and its no way to go if you have a passion for cars. I know I'm still young but i started when I was 15 and have been loving it ever since. There are also very nice incentives from the government. Tafe fee's covered. You can get up to $3500 tax free money to help you out. That is if you meet the requirements but there not that hard.

Have a browse through Box Hill's website. http://www.bhtafe.edu.au/index.htm They have alot of information on short courses, pre-apps and apprenticeships. Try other tafes as well. Swinburne, Kangan Batman.

Hope this helps mate all the best

Jesse

Link to comment
Share on other sites
LTHLRB Grand Master

LTHLRB

Posted
Posted

im currently a 3rd year apprentice mechanic at ford.. i do enjoy the work, pay is very average.. or even crap. But i enjoy working with cars, schools payed for and iv learnt a crap load. My advice will be.. if you want to go mainstream you go with a dealership or something like that.. if you want to specialize you go straight to the root.. performance.

I wasnt fortunate enough to go performance.. so i started from the bottem and will be at the top soon enough :D

Link to comment
Share on other sites
R-SPEC Grand Master

R-SPEC

Posted
  • Author
Posted
No worries mate, if you have any more questions just ask :dry: i'll try to answer the best i can.

will do bud :)

Phil wat stopped you from going in a performance shop? guessing they ask for more background experience etc rght?

Link to comment
Share on other sites
dave1200 Collaborator

dave1200

Posted
Posted

I'm not sure what field you have just pulled out of but I'm a mechanical engineer and my job is a long way off the suit and tie crap. I wear a T-shirt and shorts to work and spend half my time on a computer using CAD and the other half in the workshop putting together the stuff I've designed and had made. I have learnt to weld, run a lathe and also a mill.

It may not be your area but it's just an example how you can actually get a good balance of both.

Link to comment
Share on other sites
ylwgtr2 Grand Master

ylwgtr2

Posted
Posted

trouble is with mechanics is that anyone can buy a tool box and take a part off and put a part on....these days people will do anything to save themselves a dollar....if your good with your hands get into a niche market where the requirements for skill is high,start your own business and you wont go wrong

Link to comment
Share on other sites
blackrex Mentor

blackrex

Posted
Posted

As with Dave1200, look at doing a MechEng course at a TAFE (I'm currently doing the Adv.Dip. of Engineering Technology at RMIT) as they give you a much greater scope for employment.

Link to comment
Share on other sites
abu Grand Master

abu

Posted
Posted

Have a look at doing something through VACC

They find you work, pay half your wage and you get Government grant for tools etc so you don't have to buy your own

They also send you to trade school for a week every month or something like that

Not sure on all the specifics but you should be able to find something on there website

http://www.vacc.com.au/ApprenticeshipsTrai...85/Default.aspx

Link to comment
Share on other sites
LTHLRB Grand Master

LTHLRB

Posted
Posted
will do bud :)

Phil wat stopped you from going in a performance shop? guessing they ask for more background experience etc rght?

background experience.. only experience i had was work experience with bresciani racing.. I would love to work at a performance shop, but im not the type of person to do "apprentice work".. i like getting thrown in the deepend and taking the work head on

Link to comment
Share on other sites
R-SPEC Grand Master

R-SPEC

Posted
  • Author
Posted

ah fair enough

hehe i was doing 2nd year auto engineering at rmit but had to get out couldnt take it anymore.

dave1200 - that is actually what i would like to be doing but i cant see myself finishing uni.

im now thinking of getting away from auto/mech and get into either I.T or drafting

needa do some serious thinking cant waste any more time hehe

thanks all

Link to comment
Share on other sites
dave1200 Collaborator

dave1200

Posted
Posted

I guess it really depends on how much you want to do it. I don't think anybody entirely enjoys their uni experience but it's a means to an end. If you are thinking about IT or drafting then you are definitely confining yourself to an office job that is less hands on than what your automotive engineering career would have been.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      RB gearbox options

      By TurboTapin · Posted

      What makes you say CD009 boxes are not as strong as you would think? I've always been told the last revision (CD00A) is good for 1000whp and I have no issue's believing it when comparing one side by side with an RB25 box. Makes them look tiny. 
    • OO Dan OO
      Nismo 1.5 way Stub axle issue

      By OO Dan OO · Posted

      I picked up an open Center with shafts. I was told the Open shafts will fit a mechanical LSD and looking at them. I think they will work. Will update 
    • OO Dan OO
      Nismo 1.5 way Stub axle issue

      By OO Dan OO · Posted

      The manual says a lot about the different ratios requiring different shafts. all the Centers are the same but depending on the ratio, this determines the shafts because different ratios need the center to be offset more or less or right to left.
    • r32-25t
      Nismo 1.5 way Stub axle issue

      By r32-25t · Posted

      those 2 sets of shafts will not interchange and if you’re lucky you haven’t damaged anything with all your pressing and bashing you said you’ve done 
    • TurboTapin
      Lets play a game - What is causing my oil consumption?

      By TurboTapin · Posted

      Freshly built stroked RB25/28. Motor runs great but consumes a lot more oil then It should. This summer with the heat I was consuming roughly a quart per 1800-2000kms. Now with the cold weather coming in, I'm consuming a quart per 1000kms which is no bueno. I had originally chalked this out to break in taking a little longer then it should, but I'm now around 4000km's on this engine. I think it's fair to say something isn't quite right. Here's the kicker, can't find what's causing it. I've also spoken to my engine builder and Precision Turbo and can't figure it out. Here's my train of thought on possible causes and what I've done.  Precision Turbo - I originally started thinking my oil pressure might be a tad too high for my 6466 Gen2. I took the center cartridge out, and while yes there's signs of oil on the turbine heatshield, it's very moderate. There's also very minor in/out play that concerns me. I sent pictures and videos to precision and they said the residue and in/out play is minimal and they doubt this is the issue. For piece of mind, I went ahead and installed a Turbosmart OPR V2 to bring oil pressure down. Made no difference. Precision is willing to take it in on RMA for an inspection and I'll probably take them up on that offer for peace of mind. BTW. Is it just me or does the turbines inducer's look clipped and not even between each other? I just noticed this now while posting and looking at the picture zoomed in. Might just be the picture...  Rings - Hot compression test and leak down test look good. Compression is 160 +-2psi across the board. I leak down at 16% on cyl 1,2,3,5,6 and 18% on cyl4. Keep in mind I have a snap on leak down tester and they read high (I.E, 15% on my wifes 2018 Sentra with 70000kms). Sparkplugs show minimal oil (Only #4 seems to have a tad). At a quart per 1000km's though, I would be expecting them to be wet. Here's the kicker, I run WMI. I'm thinking what if my compression rings are great, but I have an oil control ring issue on cyl4 and my WMI is steam cleaning the pistons and sparkplugs? I can still see the "Spool" logo on top of my CP pistons. The only time I see smoke out of the exhaust is in the high rpm/load range. So far, this is my main culprit. I'll probably turn off my WMI and go out with the car at spring pressure tomorrow and repull the plugs. Other thing that's strange though is that I have never seen any oil in my catch can. Thing is still dry after 4000kms. Cyl1 - Left, Cyl6 - Right. Valve seals - They're new and I would expect oil consumption on idle, first cold start or during decel. None of which is happening.  Crankcase pressure - I have 2x 10an valve cover lines to a vented catch can. Head drain and opened up internal oil drain paths. I also don't run E85. I've never seen any oil in my catch can. Doubtful this is causing any issues.  Rear main seal - I have no visible leaks, but figured maybe it was my rear main seal. After now having added 2-3 quarts, I would expect oil to leak out the bottom drain channel and/or my clutch to be slipping.  Let me know your thoughts. With winter coming and taking the car off the road until spring, I'm fine with pulling the motor apart but I would hate to take it all apart and the turbo was the issue in the end.   
×
×
  • Create New...