Jump to content
SAU Community

Recommended Posts

SKYLINE R33 Fusebox

In Cabin Fuse box:

Left column, top to bottom

10A REAR WIPER

10A ANTI-STOP (ABS PERHAPS???????)

10A STARTER INDICATOR

10A ROOM LAMP

10A STOP LAMP

10A ELECTRICS

10A ENGINE CONTROL

10A HAZARD LAMP

15A FOG LAMP

10A TURN SIGNAL

10A METERS

10A ELECTRICS

Right column, top to bottom

10A SHIFT LOCK

10A A/T CONTROL

10A AIR CONDITIONER

10A ENGINE CONTROL

10A AIR BAG

20A BLOWER MOTOR

20A BLOWER MOTOR

10A AUDIO

15A CIGARETTE LIGHTER

20A FRONT WIPER

10A MIRROR CONTROL

20A REAR DEFOGGER

Boot Fusebox

Reading from top to bottom

65A - Main

45A - Blower

30A - 4WD/LSD

30A - IGN SW

15A - FUEL PUMP

20A - HEAD L RH

20A - HEAD L LH

10A - ALT S (Alternator perhaps???????)

10A - TAIL L

20A - HICAS

15A - AUDIO

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/21684-r33-fuse-layout-translated/
Share on other sites

  • 5 years later...
hey,

Does anyone know which fuse is the reverse lights fuse?

Both my reverse lights don't work and its not the globes

Cheers

Check the plug behind the washer bottle in the engine bay. Mine werent working and it turned out the plug wasnt contacting properly due to dirt and other stuff being in there. Otherwise it may be ur reverse sensor

Hey guys, sorry im not really part of these forums,

a mate of mine got a R33 a few months back. he's having issues

with the dash lights... they don't turn on. i looked over the fuses but,

they're in jap... i cant read em. if someone could tell me which one

is the fuse im after that would b mint.

oh i have one more thing. neither of his tails come on with the parkers

the brake lights come on, but the parkers aren't i was wondering is that

a fuse thing or maybe just the blubs??

Thanks for any help you guys can offer.

Steve

  • 5 months later...

Does anyone know what is connected to the "MAIN" fuse ? I swapped a RB25 in my R32 and even when I remove the key, something is still taking power. I removed the "MAIN" fuse and it stops.

  • 4 weeks later...

R33 Series 2 Fusebox Sticker

Incase anyone is interested, i had some time to kill so i decided to make an english translation of the fuse box sticker for my r33 series 2. Here is the image so anyone can make a sticker out of it...just a bit neater than having to look up the translation on the interwebz :rofl:

r33s2fusebox.jpg

The dimensions are the same as the original.

Hopefully this helps someone!

R33 Series 2 Fusebox Sticker

Incase anyone is interested, i had some time to kill so i decided to make an english translation of the fuse box sticker for my r33 series 2. Here is the image so anyone can make a sticker out of it...just a bit neater than having to look up the translation on the interwebz :P

r33s2fusebox.jpg

The dimensions are the same as the original.

Hopefully this helps someone!

A search on Ebay will find you a decal for the fuse box some enterprising person is already selling them, as for me I just printed the one out from PSIparts, buggar paying for it!!

Edited by bradmax
  • 3 months later...
Hey guys, sorry im not really part of these forums,

a mate of mine got a R33 a few months back. he's having issues

with the dash lights... they don't turn on. i looked over the fuses but,

they're in jap... i cant read em. if someone could tell me which one

is the fuse im after that would b mint.

oh i have one more thing. neither of his tails come on with the parkers

the brake lights come on, but the parkers aren't i was wondering is that

a fuse thing or maybe just the blub

Thanks for any help you guys can offer.

Steve

Had the same problem- open your fuse box in the bonnet flip the cover over and look for a "tail" slot- it will be a 10. i think its the last or second to last slot

  • 1 year later...
  • 1 month later...

I have a question. My Left hand side orange repeater is not working. I have replaced the globe, and checked every fuse box i know of Front, Drivers side, and boot all are in working order. Any idea's i did have a slight impact on the left side when it stopped working but i dont know where this cable leads too. If anyone could offer any suggestions it would be much appreciated as i am taking the car over the pits tomorrow.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's awesome. Fully serviced/full log book history for one of those cars is super rare from what I know. With JDM's like Skyline's, Supras, are quite hard to find one with full log book history. S15's seem to be somewhat of an exception, at least the spec s australian delivered models.
    • Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
    • That's convinced me I'll bump up the G30-660 to 770   Any idea if the difference in boost pressure? Cheers
    • When: Saturday 24th of May 2025 - All day Where: Sydney Dragway, Eastern Creek Cost: Varies - Book direct with the GTR Festival Website We will be there on the day with a stand please reach out via our interest form if you wish to help out with the stand. Limited parking will be available in the display area, first in first served with current members getting priority, please register your interest with the link above also. Please post any great photos you take on the day on this thread and we will try use some in our e-mails/website/social media
    • Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
×
×
  • Create New...