Jump to content
SAU Community

Recommended Posts

OK, I have a question about IC piping. What are the different materials that can be used and what are the benefits/disadvantages in using different materials.

Also, i need the piping made in 60mm. What are the tightest mandrel bends I can get?

Also, any reccomendations of a place to get it done on the coast. Looking for best value (eg cheap but good job - what we all want eh!)

thanks in advance for any help.

Link to comment
https://www.sau.com.au/forums/topic/2169-ic-piping-material/
Share on other sites

Mild steel:

Cheap

Easy to use

Rusts on the inside and outside if no coated

Mid weight

Mild heat soak

________________________________________________

Stainless Steel:

Expensive

Harder to use and cut

Will not rust and can be polished to mirror

HeavyHigh heat soak

________________________________________________

Aluminium:

Mid / high price

Easy and hard to use, joins must be spot on for welding

Willnot rust and can be polished to mirror

Light

Low heat soak

________________________________________________

Personally go for alloy if you can and have someone to weld

it for you. If not use mild steel and have it powder coated or

HPC coated for heat treatment.

DriftKing Performance in Bris can do nice piping I believe.

Link to comment
https://www.sau.com.au/forums/topic/2169-ic-piping-material/#findComment-41282
Share on other sites

pete

i was having a look around for dump pipes for the gtr and everyone wants to sell mandrel bent ones for 600 bucks.

so did some looking around and a 90 3' mandrel bend is 9 buck so for a total outlay of about 80 buck i can make my own.

also i want to try a few combos on the zorst with a twin 2.5' system and compare it to my 3.5' system

only use stainless if you want the look( doesnt make you go faster )

alloy would be the goods but you actually have to be a good welder to do that **** so might just stick to the mandrel bents

its all good fun

if you need anyhelp give us a bell

040926626

pete

Link to comment
https://www.sau.com.au/forums/topic/2169-ic-piping-material/#findComment-41407
Share on other sites

Gday Pete

I agree mostly with boosty but i must admit prefering stainless steel in the real world.

As far as i know Ally mandrel bends and welding all up i think its gonna cost u double, I think it will be easier for ally to polish but thats about it..

Ultimately Ally would be best but no way i could afford it and i did my full pipe setup from turbo out to plenum for $200 including carton of crownies for tig welds and polished myself :-)

Link to comment
https://www.sau.com.au/forums/topic/2169-ic-piping-material/#findComment-41428
Share on other sites

reason i wanted to do alloy is that there is a guy here in tweed that does it and quoted around $500 which i think is good cos he will do all the work... or i can lower the cost by cutting it myself..

i dont wanna do stainless due to $$$ and not mild cos I dont know anyone around here that does it.

and it all depends on when i get my redundancy money thats been owed to me since november 01....... but if i get what im meant to i might just go for the 1UZ (toyota soarer v8) coversion, so i can have a 200kw hilux surf :)

Link to comment
https://www.sau.com.au/forums/topic/2169-ic-piping-material/#findComment-41537
Share on other sites

The last lot of piping I made was for a friends gtst. I used mild steel and as mentioned above cut it myself and marked the joins then taped the pipes together. Then took it to the local exhaust shop who actually oxy welded it (looks awesome) total cost for 8 welds + 6 welds around the ends to stop the pipes blowign apart was $35 (theye just charge by the hour @ $35/hour)

Not bad I thought and it looked good. Then we had the inside cleaned and the outside powder coated in metalic silver.

Link to comment
https://www.sau.com.au/forums/topic/2169-ic-piping-material/#findComment-41711
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
    • These look like S13 wheels.  And Welcome! 
×
×
  • Create New...