Jump to content
SAU Community

Anyone Used Tarox Brakes ?

robbieraver
 Share

Recommended Posts

robbieraver Rising Star

robbieraver

Posted
Posted

Im about to try out a set of fronts for a 32GTR, they are made in italy. the kit comes with caliper, rotor, bracket, braided lines and pads of my choice of race street or semi, the pads are made by pagid.

i will be using a 350mm by 30mm rotor with a 10 piston caliper under a 17inch rim.

just want to know who has used these brakes and what they thought of them compared to others, eg AP or Brembo or .......

post-34794-1209460645_thumb.jpg

post-34794-1209460761_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/216978-anyone-used-tarox-brakes/
Share on other sites
Roy Grand Master

Roy

Posted
Posted

Well if you look at the 10 piston caliper...

The main reason you run more pistons is to ensure even pad wear and pressure reducing hot spots on the pad and rotor. So the fact that the 10 piston caliper uses a square pad with a straight row of pistons rather then curved on a radius means that you dont get the benefit of running a narrower pad which curves with the rotor, and has pistons that are larger for the trailing part of the pad and smaller for the leading part of the pad. A narrower pad like most 6 pot calipers means you get to run a shallwer rotor (the heavy bit) and a larger hat (the lighter bit) so for a given rotor diameter the assembly is lighter.

If you look at ther crazy 10/12 piston calipers from the likes of Alcon that are/were used in Motorsport you can see that the piston size is dependent on the rotor direction through the caliper and the pad shape. The Tarox-10 is symmetrical front to rear with its largest piston in the middle, which is a generic solution to clocking the caliper to suit cars with leading caliper positions (Skylines) and trailing positions (Porsche/WRX etc) By that i mean look at the passenger side of the car and see of the caliper is on the right hand side of the wheel (Porsche) or left (Skyline)

So hope that quick fire response makes sense. If you look at the pad shape of a CP5555 AP 6 piston caliper and compare it to an F50 Brembo caliper pad you will get what i mean about pad shape and curvature.

I think the Tarox appeals to the "WOW, 10 piston" it must be good. I could easily be wrong, but looking at multi piston calipers from the major makers used in motorsport...thats where i am getting most of my thinking

robbieraver Rising Star

robbieraver

Posted
  • Author
Posted
Well if you look at the 10 piston caliper...

The main reason you run more pistons is to ensure even pad wear and pressure reducing hot spots on the pad and rotor. So the fact that the 10 piston caliper uses a square pad with a straight row of pistons rather then curved on a radius means that you dont get the benefit of running a narrower pad which curves with the rotor, and has pistons that are larger for the trailing part of the pad and smaller for the leading part of the pad. A narrower pad like most 6 pot calipers means you get to run a shallwer rotor (the heavy bit) and a larger hat (the lighter bit) so for a given rotor diameter the assembly is lighter.

If you look at ther crazy 10/12 piston calipers from the likes of Alcon that are/were used in Motorsport you can see that the piston size is dependent on the rotor direction through the caliper and the pad shape. The Tarox-10 is symmetrical front to rear with its largest piston in the middle, which is a generic solution to clocking the caliper to suit cars with leading caliper positions (Skylines) and trailing positions (Porsche/WRX etc) By that i mean look at the passenger side of the car and see of the caliper is on the right hand side of the wheel (Porsche) or left (Skyline)

So hope that quick fire response makes sense. If you look at the pad shape of a CP5555 AP 6 piston caliper and compare it to an F50 Brembo caliper pad you will get what i mean about pad shape and curvature.

I think the Tarox appeals to the "WOW, 10 piston" it must be good. I could easily be wrong, but looking at multi piston calipers from the major makers used in motorsport...thats where i am getting most of my thinking

interesting, but i was after some real time feed back but you have brought up some good topics, i would like to try these out as firstly work will be fitting the bill and secondly every one seems to have the ap/alcon/brembo package, these brakes ofcourse are the best, i want to try something a little different, if they dont work out, then il go ap/alcon/brembo

im not using the torox 10 in the pic, those two pics are just for show and a bit of wow :D but a totaly different one with the curved caliper and larger piston leading.

by i means keep it coming... :P

nuclear_skyline Mentor

nuclear_skyline

Posted
Posted

I have used some tarox gear on my 1970 mini cooper s race car... Brings it to a dead stop really well... Then again the car weighs about 500kgs...

Other advantage of having multipiston calipers is that it moves the clamping force closer to the edge of the disc, therefore has more leverage for stopping

Roy Grand Master

Roy

Posted
Posted
interesting, but i was after some real time feed back but you have brought up some good topics, i would like to try these out as firstly work will be fitting the bill and secondly every one seems to have the ap/alcon/brembo package, these brakes ofcourse are the best, i want to try something a little different, if they dont work out, then il go ap/alcon/brembo

im not using the torox 10 in the pic, those two pics are just for show and a bit of wow :) but a totaly different one with the curved caliper and larger piston leading.

by i means keep it coming... :D

Sorry, lol like most of my advice i dont have any personal experience with gear, just stuff i have read and thought about when i look at gear.

On the bright side, fact is you will be running a big rotor, plenty of pad, no doubt a sporting compound with new brake lines that come with the caliper. Then you bleed new fluid through with the install so at the end of it you will have a setup that bo doubt you will be happy with.

Half the time the details is just details, you cant teall the difference

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • GTSBoy
      Rb25det Belts Change

      By GTSBoy · Posted

      Something coarse-ish. 180 is good.
×
×
  • Create New...