Jump to content
SAU Community

32 Hicas Light/problem

Destero
 Share

Recommended Posts

Destero Rising Star

Destero

Posted
Posted

latly my 32's hicas light has been comen on after a little while of driven.

after driven it around for quite a bit since the light has been coming on i have now narrowrf it down to these factors

if i drive for a long period of time it comes on

if i drive for 5 mins slowly and then i boost the light comes on

the light comes on and does not disapear untilli turn the engine off.

so pretty much i have came to the conclusion that if i boost or do highway driving where the wheels are spinning quite quickly my hicas comes on.

i have taken it to a normal mechanic and they had no idea what a hicas really was so im after specific help

what can i do/check to stop the light comen on

Link to comment
https://www.sau.com.au/forums/topic/217190-32-hicas-lightproblem/
Share on other sites
CRMIN-4 Community Regular

CRMIN-4

Posted
Posted

had that problem on my r33 but after trying to find the problem i went under the car two fit the lock bar i found that somthing was eating my sensor wires there were all touching try that if you have dogs or other pets

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
where is the hicas fluid located? i see the power steering but is there a seperate 1 for the hicas?

Its the same thing really.

Now I gota GTR (Might be the same as GTS-T, Im not sure, just have a look)

- OK so you check the one at the front in the engine bay. Make sure thats topped up.

- NOW open your boot / As you are facing the boot, on the bottom right handside, there is a panel you can unscrew, there will be another tank/resevour, Top that up with powersteering fluid.

The same thing happend to me and what is said above is what I did. End Result = My HICAS Light turned off.

I have posted this before BUT some ppl seem to think the tank/resevour in the boot is for the ATTESA-ETS...

Only other thing I can suggest its to get your mechanicn check the fuese in the fues box, do a wheel alignment and even diagnose the cars ECU to see if it can pick up any faults in the system if the light still does not turn off.

BTW let me know how you go about filling up the rear tank/resevour (thats if you have one, LOL!), if that is topped up and switches off the light then I can say its for the HICAS.

  • 2 weeks later...
GTRBOS Mentor

GTRBOS

Posted
Posted

i had the same problem man, fill up your power steering fluid and then fill up the rear hicas aswell, then start the car and drive it for a while for about 5-10mins and then you will know if there is a lak in your hicas system because i had the same problem and my mechanic told me to do that, and also go get a wheel alignment and im pretty sure you would be ok, i was at the stage of removing the hicas but i ended up fixin it, hope that helps mate,

cheers

NoFX_Hardcore Proficient

NoFX_Hardcore

Posted
Posted (edited)

My HICAS light comes on in my 32 R after several minutes of highway driving also...

All fluids are fine. Anyone know why it does this? Does it do this with all 32 R's or? Maybe I have a HICAS lockbar? Would the light be on always if I had a lockbar or never?

The reservoir in the boot on the right IS for the 4WD system. Still requires power steering fluid, but is not for the HICAS.

Edited by NoFX_Hardcore
(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
My HICAS light comes on in my 32 R after several minutes of highway driving also...

All fluids are fine. Anyone know why it does this? Does it do this with all 32 R's or? Maybe I have a HICAS lockbar? Would the light be on always if I had a lockbar or never?

The reservoir in the boot on the right IS for the 4WD system. Still requires power steering fluid, but is not for the HICAS.

Wheel alignment, steering wheel sensor...

Then check the HICAS computer at the back...

Chang Rising Star

Chang

Posted
Posted

Ok just to clear some things up.

Yes the R32 GTR does have a hicas fluid reservoir in the back right of the boot. NOTE any other varient R32 including GTS-t GTS will not have a reservoir there so don't bother looking.

Wheels alignments should only be a last resort IMO. Here's some possiblilites.

1: If you have an aftermarket steering wheel, you SHOULD have a hicas bosskit or your light will stay on continously.

2: Your hicas ECU in the trunk, on the underside of the parcel tray may have a fault.

3: Possible leaks in the steering / low power steering fluid.

4; If your hicas has been deleted you should be able to see a lock bar in there (in this case you don't need to worry about the light)

If all else fails just eliminate hicas altogether. It's cheap and you'll find handling alot more predictive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...