Jump to content
SAU Community

Series 1 And Series 2 Rb30 Blocks

NYTSKY

By NYTSKY,
in Engines & Forced Induction

 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted
Hi all,

Im picking up a series 1 RB30 block,does the series 1 have oil squirters or is it the series 2 that has them? (piston)

No RB30's that I have ever seen have block mounted oil squirters, that's Commodore RB30E, Commodore RB30ET, Nissan Skyline RB30, Series 1 or Series 2. They all have the basic 1980's style conrod oil holes.

Is the series 1 block a good block to use in a 25/30 combo?

Any good block is a good block to use.

Cheers

Gary

den001 Proficient

den001

Posted
Posted

there is another block that can be used, but it does require a fair ammount of work to the block to be able to adopt a twin cam head,its do-able and it weighs about 30ks heavier than a standard rb30 block, the cylinder walls are a shitload thicker than a conventional rb30 block and will last well over the 1000 wheel hp mark.....

this particular block comes with piston oil squiters.

2jz is in trouble now....

NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted
there is another block that can be used, but it does require a fair ammount of work to the block to be able to adopt a twin cam head,its do-able and it weighs about 30ks heavier than a standard rb30 block, the cylinder walls are a shitload thicker than a conventional rb30 block and will last well over the 1000 wheel hp mark.....

this particular block comes with piston oil squiters.

2jz is in trouble now....

And this mystery block is......?

Sydneykid Grand Master

Sydneykid

Posted
Posted
And this mystery block is......?

My guess is RD28T, 2.8 litre (2825cc) turbo-charged diesel 6-cyl, bore: 85mm, stroke: 83mm.

I looked at it about 6 years ago, there is a lot of work required to fit the RB30 crank (86 mm stroke) and conrods. Plus the cylinder head studs don't line up with an RB25/26 head. The water jacket needs modifying and the oil feed will need some external help.

Cheers

Gary

den001 Proficient

den001

Posted
Posted

thats teh 1, deisel, runs somthing like 22:1 compression. found in the nissan partol 92 models.... there is about 4 to 5 grand in block modification, there is a rear water jacket that needs to be welded up, and also 3 oil returns dont line up, need to modify the head aswell to compensate

MYRB30 Rising Star

MYRB30

Posted
Posted

Its too hard to fit oil jets to a RB30, I know of one shop that used five blocks before he found one that could take all size jets. The sand cast blocks of the RB30 was just to inconsistant with its core shift during casting for consistant fitting of the jets

VB- Veteran

VB-

Posted
Posted
alrite bud, you know everything

dont take it to heart mate, just saying, there are plenty of high powered RB30's out there, and its alot of work to get the RD28 block going with the 3 litre innards. i havent really heard of RB30 blocks letting go, bar those extreme cases of problems (tuning, oil contro, whatever), or extreme horsepower, but even with the latter there isnt an abudance of supporting evidence, not that i've seen anyway

  • 2 weeks later...
richie$$$rich Contributor

richie$$$rich

Posted
Posted

A friend of mine has a 25/30 setup.

Spec's are as follows,

STD Series 2 Block

STD rods and pistons (Motor has not been apart since god know's when)

RB25 head

STD Head ports

STD intake manifold

set of small cams

STD rb25 EX manifold

GT3540 0.86 rear

Haltech e11v2

044 pump

STD R33 box

H/D clutch

made 480HP on 20PSI pump fuel

Daily drive for the last 2 years @ 20psi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      Weird compression after rebuild

      By dbm7 · Posted

      Yeah. air pressure leakdown test is where I would be headed next here, using one's ears to determine whether it's the valves or bores/rings leaking...
    • GTSBoy
      Weird compression after rebuild

      By GTSBoy · Posted

      More likely you didn't bed the rings in correctly and have glazed the bores. Running with misfires on a fresh build is somewhat of a no-no. Surely no-one "smoke tests" the combustion chamber? That's what a leakdown test is for. Smoke testing is, um, a bit of a wank at best, and only really useful for external pipework.  
    • GTSBoy
      Attesa pump mount options / ideas? R32 gtr style.

      By GTSBoy · Posted

      Well, obviously that kit is not a relocation kit or anything other than just the original isolators and the like. I would suggest that it should be a matter of just bending up some flat bar to build a mount over the top of some other diff, with the flat bar held to the back of the diff by the rear hat bolts. A little welding, a little thinking about how to secure the front of this structure, maybe some different hoses in case you can't get it in just the right place.
    • GTSBoy
      Can you mount the ATTESA pump in other locations?

      By GTSBoy · Posted

      Pay diff/trans workshop to do this.   Nope. Z32 turbo ran R230 with 6 bolt GTR style axles. All other Z32 were R200. Basically same same as other R32 stuff. All were a viscous waste of space.
    • Duncan
      Can you mount the ATTESA pump in other locations?

      By Duncan · Posted

      So, I'm not a diff swapsies specialist, but I am pretty sure the 300zx ran an R220 not and R200 like the C34 Stagea, so I think it is of no use to you. As you said, all you need to do is get the centre swapped in the diff you have, which might be best done by a diff specialist. The current centre is probably desirable to someone to track so an easy path might be to swap your mechanical centre for someone with a standard centre (which is a viscous LSD, and almost certainly won't have any limited left). The only thing you have to watch swapping R200 internals between diffs is that the number of splines on your car's stub axles has to match the donor car, or you need the centre+stub axles and make sure they have the same number and pattern of bolt holes as your rear axles.  You swap your current ratio onto the new centre so you don't have to worry about matching the front. Alternatively, centres like the Nismo pro are much gentler (and have adjustable "tightness") so you could buy on of those from somewhere like Jesse Streeter or Nengun (noting it may cost you 1234% extra in tariffs by the time it lands)
×
×
  • Create New...