Wtb Mr30 Ecu, Dead Or Alive

[noddle]

Hi,

I'm after a MR30 ECU for my megasquirt project, a dead one would be ok,

as I'm only interested in the case and the connector from it.

The connector will need to be in good shape, i.e. not rusty or burnt.

Nigel

[coupe72001]

Should be able to help, let you know tomorrow.

Drew

[Factory 5]

what happened to the one i sent ya last year???

there are a few up at the local wreckers... will check price for ya.

[noddle]

what happened to the one i sent ya last year???

there are a few up at the local wreckers... will check price for ya.

I still have,

I didn't want to wreck it, (since it works),

a dead one is what I need.

Since my car is my daily drive, I need to setup MS in such a way, that I can go back to the original Nissan ECU without any hassle, ie setp MS over a weekend, If its not right by Sunday evening, I can put my old ecu back in.

I will be using the stock wiring, with some small changes (which are undo able) to allow MS to run.

this is what I'm going to do

http://forums.hybridz.org/showthread.php?t=133522

Nigel

Edited May 5, 2008 by noddle

[Factory 5]

HEY!

exacgtly the same idea i had!

any chance of a full write up later when its finished?

adn are you interested in making a kit for me? $$$$$

cheers

[noddle]

HEY!

exacgtly the same idea i had!

any chance of a full write up later when its finished?

adn are you interested in making a kit for me? $$$$$

cheers

I will be keeping a record of how it will be set up, and will make it available when it's finished

as for doing it for some one else, I'm not sure at this stage,

I ordered my MS today, and hopefully it will turn up in a week or two.

Nigel

[noddle]

so, did any one have a dead ECU they want to sell me cheap ?

Nigel

[noddle]

Any One ?

I'm still after a cheap Dead MR30 ECU, and Air Flow Meter connector, the bit on the meter itself, not the cable

this if for my Megasquirt project which rocked up yesterday, I already have my stim assembled.

Nigel

[coupe72001]

Definately can get one, just forgot to pick the damn thing up. Will try to remember this weekend when I visit my mate. Sorry bout that.

D

[noddle]

Definately can get one, just forgot to pick the damn thing up. Will try to remember this weekend when I visit my mate. Sorry bout that.

D

any luck ?

my MS is all put together now, waiting on some other bit now before I can install it .

Nigel

[coupe72001]

Your in luck... provided I can just remember to pick the damn thing up! I'm going to write ECU on my forehead with texta before I go over there again. Do you still need those axle bolts too?

[noddle]

Your in luck... provided I can just remember to pick the damn thing up! I'm going to write ECU on my forehead with texta before I go over there again. Do you still need those axle bolts too?

Just the ECU, I will use the axle "nuts" off my "parts" mr30..

If you have access to a wrecked mr30, I also would like the airflow meter connector (cable with plug, from the harness) and the connector on the airflow meter hardware ( or the whole air flow meter), I don't need the air box or connector pipe.

we haven't worked a price out yet, send me a PM with what you are asking.

Nigel

[noddle]

Hi,

I'm still after a airflow meter connector (on the airbox) for a MR30 skyline to finish my megasquirt project off,

a RB30 one has a small connector

Nigel