Jump to content
SAU Community

Please Help! Vic R34 Gtr Engine # Doesn't Match?!?!


Recommended Posts

Hi I am planning to buy a R34 GTR private sale.

The steel plate with the VIN/Engine number in the rear left engine bay is stamped/engraved.

I read on this forum that if it is engraved then it might be stolen - factory plates have the details PRINTED, not engraved on them.

The VIN matches what Vicroads tells me, but the engine number is not the same as that stamped on the plate. The guy told me not to pay any attention to that as that was the stamp in Japan, and the engine number would be different in Australia?!?!?!

He is sure the engine hasn't been swapped.

The compliance plate is a red/mauve printed plate on the left hand side of the engine bay, about halfway down.

Just wondering what you guys think about this, is it dodgy? I was originally planning to buy it in the next few days.

Cheers. Any advice would be greatly welcome.

GEt the engine number off the block and call vic roads. If it has been registered before they will have record of it and can also tell you if it's a stolen motor.

The original engine number will also be on one of the ID tags in the engine bay. check that the number on the block matches that tag.

Engraved VINs are fine.

I've had a few cars like this.

And even if the engine number doesn't match (provided it passes a 'stolen' check) that's fine also, the engine could have simply been replaced (however, whether

you want to buy a car with a swapped RB26 is a different issue.)

Thanks that's good advice.

Dave1200, do you know where I can find this engine ID tag in the engine bay of a 2001 Series 2 R34 GTR non-vspec???

I didn't see any other tags apart from the VIN plate and compliance plate, but I wasn't looking for any, so I might have missed it.

Cheers.

Thanks that's good advice.

Dave1200, do you know where I can find this engine ID tag in the engine bay of a 2001 Series 2 R34 GTR non-vspec???

I didn't see any other tags apart from the VIN plate and compliance plate, but I wasn't looking for any, so I might have missed it.

Cheers.

Dave is right, it will be on the block also. Try the front to start with underneath the cams but if not either side by down through the gaps.

Found this thread:

http://www.skylinesaustralia.com/forums/N1...umber+R34+where

It might pay to use the software some of the guys have access to on here, think it is nissfast.

Can you PM me the car out of interest please. Don't worry not going to buy it instead!

if you call 131171 and use the prompts to check a vehicle....all you need to do is say the reg number and the recorded voice at the other end will tell you the VIN,engine number,date of reg expiry and if it been through the VIV system ect.......its a 24 hour system so you can do it anytime.....just give them the reg and it will sing like elvis giving anyone the details of your vehicle,i actually think its a breach privacy myself and shouldnt be allowed.....imagine the amount of false-e-fying you could do and shit you could get innocent ppl in

Edited by ylwgtr2

Before you hand over your hard earned. If you suspect it is stolen, look into it as much as you possibly can and if you find it doesnt match up then report the seller or just forget about it and look elsewhere, its not worth the loss if it turns out to be stolen.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...