Electronic Hybrid Boost Controller

[walkoau]

hi guys.

anyone know which port the boost signal line goes on to on the solenoid? and which port is then connected to the wastegate? port# 1 or 2. im not sure if it matters but just want to double check.

maybe some one has a diagram they can scan and post up?

thanks

Justin

[GeeTR]

I was just looking at a mates setup tonight actually. If the solenoid is sitting in front of you on its side, black plastic cover closest to you. Theres a port left, right, and down.

In this orientation, the port facing DOWN is the feed (from plenum / comp cover etc) the port to the LEFT goes to the actuator. The port to the RIGHT is left open to atmosphere.

Haha, not how useful that is to you.

[walkoau]

I was just looking at a mates setup tonight actually. If the solenoid is sitting in front of you on its side, black plastic cover closest to you. Theres a port left, right, and down.

In this orientation, the port facing DOWN is the feed (from plenum / comp cover etc) the port to the LEFT goes to the actuator. The port to the RIGHT is left open to atmosphere.

Haha, not how useful that is to you.

thanks champion

thats exactly what i needed.