Jump to content
SAU Community

Recommended Posts

The 60 is when the oil is cold and you want your oil to be think on cold start to protect the engine from wear. is more the smaller number that is inportant because that is the thickness when hot which is what your engine spends most of it's time being. If you look at what nissan suggests for our climate and they recomend 10W-30/40/50. For 5W-?? the climate they suggest for this is around 10 degree max. If i was on my computer i could post the chart up from the manual, i can do it later if people are interested.

Edited by D_stirls
The 60 is when the oil is cold and you want your oil to be think on cold start to protect the engine from wear. is more the smaller number that is inportant because that is the thickness when hot which is what your engine spends most of it's time being. If you look at what nissan suggests for our climate and they recomend 10W-30/40/50. For 5W-?? the climate they suggest for this is around 10 degree max. If i was on my computer i could post the chart up from the manual, i can do it later if people are interested.

I think you have that totally backwards.

The lower number is how the oil acts when cold (in the case of a 10-60 weight oil the oil acts as if it is a 10 weight oil (thin) when cold.

The higher number "60" reacts the same as a 60 weight oil (thick) when hot.

All engine oils get thinner when hot, so the oil will not be physically thicker when hot.

When cold you need a light oil to move from the sump to all the parts that need the oil to lubricate. In a freezing temperature climate ie Canberra in Winter 5w engine oils assist in starting the car and limiting engine wear.

Most of the engine wear on a normal car occurs at startup where there is limited lubrication.

Better re-read that chart.

I think you have that totally backwards.

The lower number is how the oil acts when cold (in the case of a 10-60 weight oil the oil acts as if it is a 10 weight oil (thin) when cold.

The higher number "60" reacts the same as a 60 weight oil (thick) when hot.

All engine oils get thinner when hot, so the oil will not be physically thicker when hot.

When cold you need a light oil to move from the sump to all the parts that need the oil to lubricate. In a freezing temperature climate ie Canberra in Winter 5w engine oils assist in starting the car and limiting engine wear.

Most of the engine wear on a normal car occurs at startup where there is limited lubrication.

Better re-read that chart.

Yep sorry i have the numbers around the wrong way;

But here's the chart;

post-27020-1209911315_thumb.jpg

The 10 or 10W is not a viscosity its a cold pouring index . So 20w50 is not 20 weight oil when its cold .

Synthetic oil is supposed to be quite "thin" when it's cold like very cold and this would be a huge advantage at start up .

Plenty of people like the Edge 10w60 but if the 60 number scares you Mobil do a synthetic 15w50 from memory .

If I was pushing a turbo engine hard and for any length of time I'd use the 10w60 too .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Son, in this country, that is a piece of Gyprock. f**king drywall. FFS! I also like the autocorrect of trailer to tablet. I was reading it and thing, "what the hell drugs is he on?" Then the photo made it clear enough.
    • SO whats the deal with this issue? I've read a heap of posts from the infinity owners in the US having full engine swaps done under warranty. Most claims are done on earlier cars than 2019 but I'm sure I've come across claims of 2020 models also having this issue. I like the 400r and Q50Red/S but can't fathom dumping close to 50k on a car with terminal issues!!! 
    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
    • As @Duncan said - the bores are most likely to cop it. But anything can and does happen. Rods are cheap. Rods are good. The work to rebuild the motor will be 30x the price of rods. You won't notice it.
×
×
  • Create New...