Jump to content
SAU Community

Nulon oil  

24 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hi everyone.

I recently fell for the propaganda from Nulon. I bought Nulon 10w-40, since then been having problems. Engine revving strangely. Feels like it's not as free revving at high revs etc. I used Shell 5w-40 before and had no problems.

Has anyone tried Nulon, or had problems with it? Feedback would be appreciated. I'm trying to eliminate things to get to the bottom of the problem.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/
Share on other sites

best to stick to the good brands ive found :nyaanyaa: but yet again your problems may not exactly be oil associated, VAC leaks, spark fuel can also cause these dramas, but as stated above if your unsure drain it replace filter and oil with quality brand and see if it helps

Good luck

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3842293
Share on other sites

probably pointless to the question your asking about nulon but i used castrol in my car once. each time i started it cold could hear tappets clicking (meaning all oil is drained out of head and not leaving a film on anything). changed it again 2 weeks later to an $80 for 4 litres motul and havent looked back since. i figure oil is like blood in your body so for the extra $50 or so when your doing a service its well and truely worth it. On the other hand some people say oil is oil but thats just my 2 cents worth!

brett

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3842626
Share on other sites

i know audi use castrol or motul if you have the R or S series , ive got shell in the Audi and motul in the skyline havent had any problem with them

every car has different clearences .. mightbe worth it changing oil n filters

P.s use oil flush t o completely get rid of old oil from the motor helps it keep it sludge free

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3842876
Share on other sites

probably pointless to the question your asking about nulon but i used castrol in my car once. each time i started it cold could hear tappets clicking (meaning all oil is drained out of head and not leaving a film on anything). changed it again 2 weeks later to an $80 for 4 litres motul and havent looked back since. i figure oil is like blood in your body so for the extra $50 or so when your doing a service its well and truely worth it. On the other hand some people say oil is oil but thats just my 2 cents worth!

brett

Yes, i have the same with the Nulon. Tappets clicking on start up. Highly irritating, just another bad experience i guess. Maybe i should stop being so cheap and buy good oil. I have used Nulon additives a few times and had no problems.

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3843309
Share on other sites

i have alot of different oils in the 4 years ive had my 33 ( shell motul nulon royal purple redline VP racing oils and more) full synthetics are the way to go. you will also find that the older the engine the heavier wheight oil you need to use eg older 15w50 newer 5w30 or 10w40 winter you can use a slightly thinner oil it holds its consistancy in colder climate in summer the oil thins out as it gets hotter it will not protect the engine as much if you are using 5w30 or 10w40 in older engine.

the best thing to do is use an oil flush and put in a better oil.

i found that the best oils for me where royal purple, redline, VP racing and motul is borderline for me.

my 2 cents worth

cheers marcus

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3847530
Share on other sites

+1 for motul turobolight I used it in my NA/34 it felt much better then when the service center was putting in mobil. Its not even that expensive I think i payed like $65-$75 for like 5 liters at autobarn in browns plains. I used both 5w-40 and 10w-40 both seem to be fine id recommend motul. Never gave me a single problem and I used it for about a year and a half.

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3848464
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
×
×
  • Create New...