Jump to content
SAU Community

Recommended Posts

Hi Guys, Ive got basicly a stock R34 GTT.

The wife has said I can spend a few $$ on it :D :D

I want to warm it up a bit.

Budget is somewhere between $3000 and $5000.

Cant be too loud or Droney afterwards, its a car for daily use.

Whats the recommendations for the best bang for the buck?

I was thinking along the lines of

Pod Filter

Bleed Valve

Exhaust

Intercooler

Is that a reasonable start?

Any recommendations on brands / things to avoid?

Whats the Turbosmart E Boost like? Someone recommended one to me. Better getting this than a mechanical bleed valve?

Any ideas what increase in performance I would be looking at?

Lastly, wheres a place that does a good job at a reasonable price?

I bought it from Unique Autosports and Im quite happy to go back there. Anyone have good or bad experiences from them?

thats a start,

1st things i done

hks pod filter

bleed valve- boost up to 12psi

3'' exhaust,3''high flow cat, 3.5'' cat back

yet to get cooler but its in the process of being made.

saving up for apexi avcr- elec. boost controller

performance gain would be noticible with a good dyno tune,

UAS is where i get alot of my parts from and find them very good.

with just pod,zorst, and boost up i hit 146kw@wheels..

hope that helps..

cheers...

www.freewebs.com/2BNVS_r33

get a full exhaust and dont buy a bleed valve get an electric one instead. you can get fairly cheap second hand items such as the profec b. if your not looking for big hp you dont need the front mount intercooler. air filters also dont do that much. spend the rest of the money on some good suspension and a power fc. :(

I dynoed my car with a K&N panel filter and got 176kw@6007rpm with 1304Nm @4713rpm.

I fitted a 2 3/4 in stainless cat back exhaust and had the cat removed(because we can in NZ:p ) and then redynoed it and got 195kw@6660rpm and 1398Nm @4655rpm

This was on a dynapack pro V5 hub dynamometer.

All figures are at the wheel hubs.

You seem to on the right track, apart from the bleed valve. Forget about that and get an electronic boost controller. But a SAFC might be a good idea as well, to keep it from leaning out at higher boost.

Glenn

Originally posted by gts4-skyline

I dynoed my car with a K&N panel filter and got 176kw@6007rpm with  1304Nm @4713rpm.  

I fitted a 2 3/4 in stainless cat back exhaust and had the cat removed(because we can in NZ:p ) and then redynoed it and got 195kw@6660rpm and 1398Nm @4655rpm  

19kw just from removing the cat?

I didnt think they were that restrictive.

Im assuming that was the factory one you removed?

I removed the cat and fitted a 2 3/4in kakimoto stainless cat back exhaust. That gained me 19rwkw.

A SAFC is a super air flow controller, it enables you to controll the air/fuel mixtures by tricking the computer some how. I'm not really up to play with them, but have heard a few success stories from people fitting them.

Glenn

i'd go:

full aftermarket exhaust (one with centre muffler aswell as rear, since you dont want it too loud)

front mount intercooler

electronic boost control + apexi safcII, or can go for a more serious aftermarket ecu. try get these ones installed at the same time so you don't have to tune it more than once (save $).

Turbosmart E Boost is probably good, but you can also get jap brand EBC (electronic boost controllers) for a similar price. its up to you really.

instead of getting the safcII why not spend a little more for a greddy E manage. You can even find second hand power fc's for a little more than a thousand that will save you from spending money on the safc now when you will probably uprgrade to a a programmable computer in the future anyway.

GTS4 - are your kw readings to the wheels or to the fly wheel?

Check out this months issue of "Speed" the magazine. It has a RB25DET tune guide. It's worth a little look. Also got info on the V35 GT-R as well. Personaly I am adding a R34 FMC, Apexi Power FC with hand controler, air pod and exhaust to mine. Should go well I reckon. You'll get plenty of power before you even think on engine internals :P Just remeber they love to breath and the standard ECU's are full of holes.

the R34 intercooler is plenty big enough for the stock turbo.

It's thicker than the R33 cooler. If any of you R34 guys want to palm off your old stock intercooler let me know and I'll ping you $150 for it.

Get a light flywheel (and clutch while your at it).

Do the exhaust, all the way. Thermal wrap the dump & front pipe.

Diff cradle kit

Panel filter.

Boost controller.

For starters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I recently got their dbw 74mm throttle body and pedal kit. It is sensational quality especially the wiring harnesses. Unfortunately I can’t answer u about the fitment to stock inlet manifold as I’m going Rahjab Racing forward plenum. Only one thing to be careful of is understand u have to pay gst and import fees if your purchase is over $1,000 in one shipment.
    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
×
×
  • Create New...