Jump to content
SAU Community

Recommended Posts

Hi all,

Ive noticed today the the gauge that shows the Front Diff Torque has started to move during normal straight line driving and the more i put my foot down the higher the gauge will go.

Usually the gauge only moved when i turned a corner quick i think, but never during straight line driving.

Which one is normal!

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/217829-r32-gtr-front-diff-torque/
Share on other sites

I think i may have found the answer to my own question.

Is it because I have 17" wheel all round and the tyres i have are 255/40 on the rear and 235/45 at the front?

I recently changed wheels and these were the tyres that came with it.

Does this have a negative effect at all?

Also, the car came with a torque split controller...

Definitely get same rolling diameter tires front and rear, otherwise one set of wheels are technically trying to travel a greater distance then the other set of wheels, the attesa thinks you have slip and engages 4wd, doing so constantly overheats and wears out the clutch plates in the transfer case

Yes.. You will loose ABS

in the fuse box in the engine bay.. on the left as you open up the bonnet.. the fise said something like ANTI/4WD/PTC.. or of the sorts.. its the first green fuse in the row of small fuses towards the center of the thengine bay.. This way you wont loose abs..

You can run different sized tyres front and rear as long as the rolling diameter is the same (or close to). An example of this would be something like 265/35/18 and 235/40/18, if my maths is correct.

No good to run the car on 2wd for too long with just the fuse pulled out too. If you want to do it rwd, take out the transfer case too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
×
×
  • Create New...