Jump to content
SAU Community

Drift R35 Gtr? Hell Yes


ZOKU
 Share

Recommended Posts

Just read this article today, from Japanese Option Magazine March 08 edition. Blitz / Dunlop team has announced that they will enter two cars in the Japanese Drift league. One is for D1 and the other is for the "Street Spec D1". The Photo is only a mock-up of what the vehicles would look like.... They will get rid of the transaxle set up and use a FR box and R32~34 rear cradle. Other changes include traditional wire throttle set up instead of the electric and the clutch pedal. Motec ecu is also on the list. Go BLITZ... is Nomu-ken driving this... it didn't say a thing about the driver.... Sweet news! Hope it Pisses all over the EVO and Subi. I hope ppl won't mind this ride becomes a 2WD.

Edited by ZOKU
Link to comment
Share on other sites

I saw their D1GP Spec 35 at TAS.Im sure it was just a normal 35GTR back then though. Would love to see it in action.

I wonder what they will do to the motor? If anything.

Link to comment
Share on other sites

i heard back a whiles ago of somethign liek this.

thought it was all rumours n thats it.

i for one think itll be itneresting how they get around the whole "gearbox used to be mounted off the ddiff thing".... wont be a great deal of room to fit a hollinger or soemthing up to the motor... as there is no trans tunel for it....

good luck to em :(

Link to comment
Share on other sites

  • 2 weeks later...

I think it will be good. although it has he base model of a 350 and will prbly have the same effect of drift that the z has. As there arnt many z's in drift i dont think there will be 35 gtr's in drift. :?

But idk i could be wrong

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • There's probably an underlying issue with the A/C system too. I recently fixed mine, now it's fully control by the Haltech and car's factory HVAC controller  Have a squiz here:    
    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
×
×
  • Create New...