Jump to content
SAU Community

Recommended Posts

Guest TR34GT

Hello again fellow SAU Members,

I was wondering if any of you out there would be interested in developing database sheets of problems and solutions for the R34 GTT.

Attached are the first four (4) Car Care Data Sheets that I have put together so far.

The sheets will be updated as I go.

They are meant to try and give owners an idea of how various problems were solved on their car.

If anyone is interested in contributing to this database, please feel free to complete and email me their problems and answers.

I was hoping that SAU would eventually allow me to keep this database on this site.

But for now, the data is stored in my profile.

Many thanks.

Regards

TR34GT (Jim)

CDS_No_1___Engine_Running_Rough_at_Idle.pdf

CDS_No_2___Engine_Running_Rough_at_Idle_and_Load.pdf

CDS_No_3___Boost_Gauge_Not_Working.pdf

CDS_No_4___Tiptronic_Transmission_Light_at_High_Speeds.pdf

CDS_Template.doc

Edited by TR34GT
Link to comment
https://www.sau.com.au/forums/topic/217925-r34-gtt-maintenance/
Share on other sites

  • 4 weeks later...

Good compilation there. Just some input, i've have problems with my auto transmission light coming on once in awhile before. it stays on after startup..dissapears after awhile...and when this happens my cars in 3rd gear ONLY.

I read somewhere that the light comes up for afew reasons, one being low voltage i.e. a weak batt. ALSO...your car starts off and stays on 3rd as a result of low voltage. Which explains why the lights dissapears afterawhile (charging) and re-starting puts ur car back into normal gear shifting.

I got my wetcell swapped for a Delkor Dry cell. Problem never came back since...=D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...