Jump to content
SAU Community

N00b Question - R32 Dash Instruments

HuH
 Share

Recommended Posts

HuH Community Regular

HuH

Posted
Posted

I've just bought an R32 GTS-T, and I can't work out what the guage above the fuel level is telling me?

It's the one that goes from -7 to 0 to +7. It sits constantly on 0 while the car is running. The little turbo looking logo and the key of x100mmHg hasn't helped me work it out.

Sorry for the beginner level question, but I'd love to know what it is!

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/217961-n00b-question-r32-dash-instruments/
Share on other sites
(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted (edited)
That was my assumption, but it's static on 0. Could be faulty, I guess? Or I'm just watching the road when the car is on boost. =/

Give the car a rev when idling and watch the boost gauge to see it the pointer goes up,

then go for a drive and put your foot down and watch the gauge to see if it goes up, keep an eye out on the road as well. LOL!

The boost gauge will only go Up if you put your foot down on the accalerator. Remember, boost runs off the exhaust gases/fumes.

If you are just traveling at a consistent speed to will just sit at 0 or under boost. The turbos are cycling the air but not spooling up.

Edited by (00)SKYLINE(00)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ah right. Maybe my rb just loves chewing through batteries lol.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      On the R34 can't you just unplug the IACV? This is the way I've always done it on the R33. Disconnect IACV, get it idling around 650rpm, and then do a power reset on the ECU to get it to relearn idle (factory ECU).   The big reason no one has touched on as to why you'd want to get the base idle right, is that it means the computer needs to make smaller adjustments to get a good idle at 700-750rpm.   Also, cleaning the IACV won't normally make the car suddenly idle lower or higher. The main issue with the IACV gumming up is that the valve sticks. This means the inputs the ECU gives, aren't translating to changes in air flow. This can cause idle choppy ness as the ECU is now needing to give a lot of input to get movement, but then it moves too far, and then has to do the same in reverse, and it can mean the ECU can't catch stalls quickly either.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      12.8 for a great condition, fully charged battery. If the battery will only ever properly charge to about 12.2V, the battery is well worn, and will be dead soon. When I say properly charge, I mean disconnect it from the car, charge it to its max, and then put your multimeter on it, and see what it reads about an hour later. Dieing batteries will hold a higher "surface charge", but the minutest load, even from just a multimeter (which in the scheme of things is considered totally irrelevant, especially at this level) will be enough over an hour to make the surface charge disappear.   I spend wayyy too much time analysing battery voltages for customers when they whinge that our equipment (telematics device) is causing their battery to drain all the time. Nearly every case I can call it within about 2 months of when the battery will be completely dead. Our bigger customers don't even debate it with me any more ha ha ha. A battery at 12.4 to 12.6 I'd still be happy enough with. However, there's a lot of things that can cause a parasitic draw in a car, first of which is alarms and immobilisers. To start checking, put your multimeter into amps, (and then connect it properly) and measure your power draw with everything off. Typical car battery is about 40aH. Realistically, you'll get about half this before the car won't start. So a 100mA power drain will see you pretty much near unstartable in 8 days.
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      Car should sit at 12.2 or more, maybe 12.6 or 12.7 when fully charged and happy. If there is a decent enough parasitic load then it will certainly go lower than 12.2 with time. You can't beat physics.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ok guess I can rule out the battery, probably even the starter and alternator (maybe) as well. I'm gonna clean those leads and see what happens if it's still shit I might take it to an auto electrician. Unless the immobiliser is that f**king heavy, but it shouldn't be.  If I start the car every day, starts up perfectly never an issue. Isn't 12v low, shouldn't it be around 12.5v?
×
×
  • Create New...