Jump to content
SAU Community

Computer Piggy Back Or New Ecu

smidy

By smidy,
in Engines & Forced Induction

 Share

Recommended Posts

smidy Community Regular

smidy

Posted
Posted

hi guys , just wondering about the safc piggy back for the standard ecu????? :P if thats how it works????? :D still learning it all only had car 6mths, whats the advantages or is it better to get a new ecu and which is more cost effective. car is standard now with 3" mandrel bent exhaust with high flow cat, r33 gts-t 95 series 2.

post-50800-1210063275_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/218012-computer-piggy-back-or-new-ecu/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

theres quiet a few in the for sale section

i found at least 3 or 4 tonight

and theres several on ebay

the rarity i think is a bit of a flip flop, ive always been able to find one

usually they are around $1100 these days, i see no need to pay $1500 for one to suit RB25

nuclear_skyline Mentor

nuclear_skyline

Posted
Posted

Greddy Emanage Ultimate. They make a plug and play harness for it, which means you dont have to cut any wires, literally plug in...

It has all the features of the Power FC, but as a piggy back retains the factory goodness of knock control, cold start up, etc... unless you want to change them, which there is a capacity to do...

Also, it has anti-lag and a whole host of other crap... Cheaper and newer technology then what the Power FC is...

My 2c

D_Stirls Veteran

D_Stirls

Posted
Posted (edited)
Greddy Emanage Ultimate. They make a plug and play harness for it, which means you dont have to cut any wires, literally plug in...

It has all the features of the Power FC, but as a piggy back retains the factory goodness of knock control, cold start up, etc... unless you want to change them, which there is a capacity to do...

Also, it has anti-lag and a whole host of other crap... Cheaper and newer technology then what the Power FC is...

My 2c

With the price of second hand Power FC's these day's i don't know why people would use Emanage any more. It's still a signal fudger and has nothing on a full stand alone replacement ECU which these days is only about $3-400 more expensive.

It does retain the cold start (as most after market ECU's do now) and as for Knock Control if the tunes are good then there shouldn't be a need for it. At least with Power FC you can look at the hand controller and see what level of Knock you are getting.

Edited by D_stirls
DazWah Collaborator

DazWah

Posted
Posted

For the mods you only have, i would go a SAFC for the couple of hundred dollars to buy and the hour or so to tune, its your best bet for now. Also get a boost controller of some sort, when you get more mods then your best of getting your ECU remapped, then you can sell the SAFC without loosing much on it.

nuclear_skyline Mentor

nuclear_skyline

Posted
Posted
With the price of second hand Power FC's these day's i don't know why people would use Emanage any more.

You said it second hand PFCs are still $300-400 more expensive then a brand new plug in Emanage Ultimate. I'm not saying the PFCs are bad, they're a fantastic unit and very good for tuning, but they're getting expensive and old now...

It's still a signal fudger and has nothing on a full stand alone replacement ECU which these days is only about $3-400 more expensive.

full stand alone units are great but require a crap load of work to put in... The EMU can be unplugged, which means the car returns to factory ecu settings, and put into your next pride and joy...

Your completely right about the hand controller, a definate advantage of the PFC... That is one area that needs to be updated with the EMU... Apparently with the EM Blue you can you the Profec Eo1 to display info...

Horses for courses... Both are great units, and if you look at what URAS says, and a couple of the other tuners, they'll tell you that both units can achieve the same results.

smidy Community Regular

smidy

Posted
  • Author
Posted

thank you everybody for all input, slowly getting a clearer picture on everything! :) the safc where do i get, where does it mount,bolt on, attach???

and cause down the track i will be doing further modifications (relentless modifications if money came by easier :) ) would i be best just getting a new ecu rather than remapping every modification as i proceed :O as then i could gain best performance,fuel economy etc right throughout mods???

thanx for all the replys, stoked to learn shitloads bout my weapon of mass destruction.........to be! and feel confident with experienced replys not mechanics pissing in the wind to you! :)

smidy

smidy Community Regular

smidy

Posted
  • Author
Posted

with the power fc is it as easy as unplugging the standard ecu and plugging in the power fc and program from there, or is there shitloads of wiring and autoelectrical work to be done, then program?

D_Stirls Veteran

D_Stirls

Posted
Posted (edited)

It's plug and play. So yes just unplug your standard ECU and plug the P/FC in. The only wire you would have to run is the lead to the hand controller but that can go anywhere. you can even put it in the glove box if you don't need the see the readings.

Edited by D_stirls
paulr33 Grand Master

paulr33

Posted
Posted
with the power fc is it as easy as unplugging the standard ecu and plugging in the power fc and program from there, or is there shitloads of wiring and autoelectrical work to be done, then program?

this along with almost any question you can think of are covered in the PFC FAQ

spend about 30 minutes and read the first few topics, it will give you a feel for the unit and clear up the common concerns and questions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • GTSBoy
      Rb25det Belts Change

      By GTSBoy · Posted

      Something coarse-ish. 180 is good.
×
×
  • Create New...