Jump to content
SAU Community

Recommended Posts

As the subject says.

Looking for a set of english instructions to install this thing, google or forum searches here didnt find anything for me.

This is the unit im talking about: http://www.nismo.co.jp/en/products/competi.../mfunction.html but cant find anything on the nismo site either.

Link to comment
https://www.sau.com.au/forums/topic/218055-34gtr-nismo-mfd-installation/
Share on other sites

So this is a Nismo edition of the standard MFD in the GTRs?

Just wondering because I couldn't locate any of the "G Meter" or Lap timing features on mine that were mentioned in the Top Gear review Clarkson did. I had assumed it was a different variant on the UK imports..

here ya go. read the last line.

Nismo's MFD Upgrade is an upgraded vehicle monitoring system. It comes in two versions. The first allows standard vehicles to receive the same information as the V-Spec Models on the in dash screen. Including Boost, Throttle %, Injector Cycle, Oil Temperature, Water Temperature plus Exhaust Temperature and Intake Temperature.

Some nice changes to standard features include increased boost readings up to 2.0bar, and increased range for temperature meters. These are a must for tuned GT-R 34s.

Additional features include a Start up display upgrade, Single mode Meter display or Twin mode meter display. G force-meter, Lap Time information and more.

The MFD also includes MFD Data Logging Analyser system software. The software can also display many more parameters. Unfortunately this is available only in Japanese, however there is abundant information on the internet on how to navigate through this software.

Fitting involves removing the dash screen and swapping electrical circuit boards inside this enclosure as well as adding the new boost sensor.

Edited by R34NRG

Rysith, yeah im pretty sure it was only ones imported into the UK by nissan themselves that had the gforce meter and whatnot unlocked. The nismo one you can buy (around $800ish i think) that i have has all the extra features. Pretty rich but its my toy so ill spoil myself with it :)

Im not fitting the unit myself however I asked if the workshop could fit it while it was in and they asked if it had english instructions so if I had them I could guarantee it would be done.

  • 2 weeks later...

The workshop has apparently got this thing fitted but now they say they cant install the software for it as its in japanese?

Is the software needed just for the meters in the car? or is the software just for the lap timer gear if you want it on the comp?

Anyone had any experience with this unit. thanks in advance

The workshop has apparently got this thing fitted but now they say they cant install the software for it as its in japanese?

Is the software needed just for the meters in the car? or is the software just for the lap timer gear if you want it on the comp?

Anyone had any experience with this unit. thanks in advance

as far as i know the software is only used to download data to a laptop, hasnt got anything to do with actually running the MFD.

have they tried rebooting the mfd after putting in the circuit boards?

btw brett if it wasnt much trouble could u possibly take some pictures has to where the circuit boards are placed? im comtiplating getting the nismo version myself, and would love to know how to get it working before i purchase it.

of course if its outta your way dw about it.

Edited by R34NRG

Sorry I didnt install it myself, as far as im aware though the installation shouldnt be too hard for someone who knows what they're doing, from what other have said its just a matter of swapping the 2 circuit boards and fitting the new boost sensor (and a little button in cabin somewhere for the lap timer if you want it). My workshop (C&J Motorsport bris southside) managed to install it without any english manuals and really cheap.

Setup is a little bit tricky as I had to search online for a good hour and piece everything together to work it out and everything is in japanese again, once you have a good set of instructions though its easy enough, pm me if you need any help took me about 10min once I knew what I was doing (as you need to take the car for a quick drive). Might even write up a little tutorial while I can still remember as I couldnt find anything on SAU and the UK GTR site was missing a few things.

Btw its a nice little addition to the car, probably overpriced but its worth it to have the neat feature like the gforce meter :D plus on my standard mfd I guess it wasnt setup properly and throttle sensor and another one wasnt working, however with the nismo one now all sensors work 100%. One thing I did notice however was my cd player wasnt working anymore im not sure if the nismo one doesnt work with it or the workshop didnt hook it up, however im not fussed as I have a dvd/audio player waiting to go in.

  • Like 1
  • 6 years later...

Setup is a little bit tricky as I had to search online for a good hour and piece everything together to work it out and everything is in japanese again, once you have a good set of instructions though its easy enough, pm me if you need any help took me about 10min once I knew what I was doing (as you need to take the car for a quick drive). Might even write up a little tutorial while I can still remember as I couldnt find anything on SAU and the UK GTR site was missing a few things.

Reviving an old thread here but I cant seem to find anywhere else in regards to the setup process of installing the NISMO MFD Ver II. :(

I tried msg'ing AhhBurt but he hasnt been online since 2011! lol

So can anyone shed some light on how to setup the Nismo MFD once installed?

Cheers,

Glen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been a while since I've heard anyone mention Kumho tyres. It's like they've fallen off the radar in terms of street/track tyres. I still want to get below 1m50s on the RS-4 tyres at SMSP, just because lol. Even doing a 1m52s lap, going into T1 was sketchy af.
    • I've run most of the semis which are available and sadly you can pretty much rank them by price.  Fast and spendy = Z221, A050, DZ03G Ok and mid range price = R888, V70A, A052 I don't really rate the AR-1 because it's not cheap enough for the performance level offered. Yes, they're much cheaper than A050 but V70A can be had just as cheap and is a much faster and more predictable tyre.
    • There's no current law that stipulates that you cannot eat dessert with a soup spoon, although, it is socially unacceptable of course, shame on you But, there are emissions laws, which is sort of on topic to the OP's questions Things like emissions are, if anything, going to get stricter in the future for road registered cars I believe, 'Merica has yearly emisions testing in some states, the UK has it's yearly MOT testing as well which includes emissions Building, and purchasing modified vehicles may become alot more problematic if you want to keep them registered, how, if, and when each state handles this is anyone's guess  More food for thought really
    • I'm on the AD09, strictly on the street. They are a very nice tyre, have done ~16k km and are near the end, might make it to 20. They are, in my opinion, very much just a street tyre. I wouldn't expect them to be equivalent to some of the others in your list on the track. Although I'd be pleasantly willing to be surprised. My memory of the AD08Rs is vague enough, due to the passage of time, that I shouldn't try to compare them, but I feel as if the AD09 is not quite as "sporty" as the AD08R was.
    • There's a difference between "selling" a product to someone (which, if you walked into a workshop or bricks and mortar store and bought and walked out with it, is just the act of buying and selling) and rolling your buggy into a workshop and having them fit non-roadworthy stuff to the car. And for the latter, let's ignore any potential legal loophole arguments that the armchair lawyer might want to make to differentiate between supplying your own parts to be fit by the workshop or getting the shop to supply and fit. The workshops that have been dealt with in the US for this are in the latter category. It would be near impossible to try to charge/attack/criminalise a shop for selling "for off road use only" parts to someone unless those things were intrinsically illegal in their own right, or had other legislation wrapped around them, such as there is for guns, pharmaceuticals, etc. Well, no. And you knew your argument was silly when you made it. And there is. it might be somewhat harder in Vic, but then that's the price you pay for electing the long list of (unts that you have to run the whole shit hole**. But otherwise, you can put an aftermarket or otherwise tunable ECU into a car and get it run through the whole shebang of emissions testing as part of an engineering cert and, so long as the tune is "locked" afterwards, then that modification is on the list that is approved on the cert. But....it is an expensive process. ** Of course, the (unts who make up a large proportion of the population that eternally try to get around the rules are also a part of the problem and the reason that you end up with draconian rules in the first place. By contrast, SA was founded and the government and civil service set up and run by very sensible types (largely German) who set up good structures that enabled a lighter touch of government on the somewhat better behaved population. it is only more recently that we have followed the rest of Australia down the criminal drainhole of penal colony behaviour and now we have to catch up with mobile phone cameras and so on.  
×
×
  • Create New...