Jump to content
SAU Community

Recommended Posts

These tips are worth considering if you want to maximise your fuel bill

Only buy or fill up your car or bike in the early morning when the ground temperature is still cold. Remember that all service stations have their storage tanks buried below ground. The colder the ground the more dense the fuel, when it gets warmer petrol expands. So, buying in the afternoon or in the evening, your litre is not exactly a litre. In the petroleum business, the specific gravity and the temperature play an important role. 1 degree rise in temperature is a big deal for this business. But the service stationsdo not have temperature compensation at the pumps. Another most important tip is to fill up when your tank is HALF FULL. The reason for this is, the more fuel you have in your tank the less is the air occupying its empty space. Petrol evaporates faster than you can imagine. Another useful information is to avoid filling up if there is a fuel truck pumping into the storage tanks when you stop to buy. Most likely the petrol/diesel is being stirred up as the fuel is being delivered, and you might pick up some of the dirt thatnormallysettles on the bottom. Hope this will help you get the most value for your money.

Edited by Spiral
Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/
Share on other sites

Just so you all know, since 2002 the legislation for recalculation for fuel vrs temp was changed and devices have been fitted to give you a more exact litre dependent on temp outside. refer to www.caltex.com.au

http://www.caltex.com.au/pricing_temp.asp

So therefore that rule is pretty much no good. IMO if the temp it taken at air temps then its best to fill up about 11 when the concrete has had little time to warm but the air temps are warmer therefore it would be giving you more than normal

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/#findComment-3848435
Share on other sites

Well it makes semi sense.. If you think about it any fuel related product evaporates, its a character that comes with its explosive or flamable properties.

I would say evaporation would be extremely minimal as the hole it would be evaporating from is small and you've got a hose stuck up its hole with a splash stopped stoping most .. So I guess it would be slightly useful but doubt it would be conciderable.

At petrol prices now id try anything .. Lucky i went and got me a girl who lives down the street from work haha.

Not dissing you Spiral, your facts were right prior to 2002..

Oh and to add keeping your tank half full is always good as it prevent you sucking up to much shit.. Although I never do that and always drive around empty never had a problem due to changing the fuel filter regularly

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/#findComment-3848515
Share on other sites

here's my tip;

Dont fill up. partial fills FTW.

Run around with less fuel = less weight = better fuel ecconomy

Also I run the tank right down to almost empty every time. This keeps sludge from building up in the bottom of the tank making the fuel filter do it's job and keeping the fuel pump working at it's best.

Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/#findComment-3848596
Share on other sites

Not when you require a service with Honda or when it comes to parts.. should of got a Yaris! Cheap on fuel and way cheap on parts and service :D

YEa honda parts arent cheap!! Comfortable and reliable cars to drive tho.

Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/#findComment-3850255
Share on other sites

here's my tip;

Dont fill up. partial fills FTW.

Run around with less fuel = less weight = better fuel ecconomy

Also I run the tank right down to almost empty every time. This keeps sludge from building up in the bottom of the tank making the fuel filter do it's job and keeping the fuel pump working at it's best.

So you have to go out of your way muh more often to put fuel in? Sounds like a stupid idea to me.

Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/#findComment-3852431
Share on other sites

hm. what i usually do is when the tank is about half way, ill jump on fuel watch and see whether today or tomorrow will b cheaper, then i will fill up on watever the cheapest day is... im too lazy to do partial fill ups, just fill it to the top!

I didnt buy a skyline to worry too much about fuel anyway. :w00t::rofl:

Edited by br3ndan
Link to comment
https://www.sau.com.au/forums/topic/218093-fuel-tips/#findComment-3852979
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
×
×
  • Create New...