Jump to content
SAU Community

Remove R34 Spoiler

NA_Goodness
 Share

Recommended Posts

NA_Goodness Grand Master

NA_Goodness

Posted
Posted

Hey guys,

Me, Mark (Marco-R34GTT), and Andrew (Fei-Sti Rex) are trying to remove Andrew's rear spoiler on his R34 GT-T. We have removed the 4 bolts, but cannot remove the last two clips that are holding the spoiler in place... We've tried everything to get these two clips out but we just can't do it..... It is just a stock couple rear spoiler... It is late, getting desperate, SOS!

Thanks..

Link to comment
https://www.sau.com.au/forums/topic/218235-remove-r34-spoiler/
Share on other sites
Spunky Munky Grand Master

Spunky Munky

Posted
Posted

I stand to be corrected, but when me and a couple of mates got together a few months ago to help remove the same wing from my friend's R34 GTT... after having done what you've done so far, we then had to unbolt 2-4 other bots holding the wing in place from within the boot itself from the inside.

What you'll have to do and I caution you that if you don't do this delicately, there will be a huge tear in the teal inside your boot which makes it ugly as... but yeah, you'll have to cut the sheet of metal from the inside of the boot and unscew the boot that way.

That's what we had to do, not sure if there are any other ways...

Good luck.

hoony Mentor

hoony

Posted
Posted

what do you use to cut the metal?

sh*t never knew a stock spoiler would bring so much misery and pain in trying to remove it!!!

yeah what do you use and umm.. your solution seems to be the only feasible one running through my mind at the moment...

cheers mate,

Andrew :thumbsup:

Granthem Mentor

Granthem

Posted
Posted

LOL dont cut anything you crazy mofos!

the last two clips (should be 3 holes in the boot, the centre ones are the big clip) are easy to remove. Get a mate to help (sounds like you have them :thumbsup:) and get a flat head screw driver.

Get the screw drivers head against one side of the clip, lever the screw driver so it pushes the side of the clip in and slowly lift the spoiler. This will cause the one side of the clip holding the spoiler in place to remain pushed against the hole in the boot, and therefore not clipping! Then be very careful, hold it in that position and place the screw driver on the other side of the clip. Lever, lift and hey presto the clip is out. repeat for the other side obviously. If your not careful when holding the spoiler with half the clip out, it will slip down and clip back in, making you start again.

Any more questions or explaining please ask, but dont cut anything is all i can say. Thats ridiculous.

Hargow Experienced

Hargow

Posted
Posted
LOL dont cut anything you crazy mofos!

the last two clips (should be 3 holes in the boot, the centre ones are the big clip) are easy to remove. Get a mate to help (sounds like you have them :thumbsup:) and get a flat head screw driver.

Get the screw drivers head against one side of the clip, lever the screw driver so it pushes the side of the clip in and slowly lift the spoiler. This will cause the one side of the clip holding the spoiler in place to remain pushed against the hole in the boot, and therefore not clipping! Then be very careful, hold it in that position and place the screw driver on the other side of the clip. Lever, lift and hey presto the clip is out. repeat for the other side obviously. If your not careful when holding the spoiler with half the clip out, it will slip down and clip back in, making you start again.

Any more questions or explaining please ask, but dont cut anything is all i can say. Thats ridiculous.

Grant has the right idea, thats how i removed mine.

Takes abit of force depending on the double sided tape holding it down

good luck!

hoony Mentor

hoony

Posted
Posted

well i passed the pits just then, putting front bar and side skirts back on tonight as well as my new 18'' Enkei's...

wing is coming off TONIGHT! hehe

Grant mate great idea, looks like i'll be trying that tonight hahaha cheers guys, will keep you all updated

Andrew :D

  • 1 month later...
ITZTRU Proficient

ITZTRU

Posted
Posted

Hey so how did u go with this? I took mine off not too long ago...it just needed a bit of extra force to pull it off...(which, i admit, stupidly...was out of pure frustration haha) but luckily enough it was the right trick that was needed all along...

hoony Mentor

hoony

Posted
Posted

lol we ended up using a drill...

japanese double sided tape = worst b*tch ever...

have to weld up the holes now lol but yeah, looks way better without the GTT wing, GTT wing only looks good on cars like 300ZX etc.

my2c

Andrew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      How old is too old for tyres?

      By Ozdavroz · Posted

      Good to see your rotors appear as rusty as mine 🤪
    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      Took it for a drive to do some logs, I’m pretty sure my voltage issues and electrical noise issues are gone, I’ve sent a log to Adam and am waiting to hear back with confirmation  att.K23U9eHyiEJxixH6y1__GQfuqK0EgIoDgQFTs9G8x_w.mp4   idle video from that day just because 
    • MBS206
      How old is too old for tyres?

      By MBS206 · Posted

      Went looking at mine, reading off the tyre, presumably these are 1st week of 2003. Still hold air (I haven't had to pump them up in over 12 months!)     I couldn't quickly find the date on the front tyres, they were fitted around 2008 to the rims, so probably not quite as old, but they have a lot more dry rot cracks in them. Still hold air.
    • MBS206
      How old is too old for tyres?

      By MBS206 · Posted

      I am now intrigued to go check the dates on the tyres on my Skyline... We need a game of who has the oldest tyre still holding a car up, and successfully holding air (for longer than a 2 weeks I feel is successful air holding).   I feel your tyres may be beating mine
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Ok, still waiting for a date to get the cams installed on the MX5, why so long, because MX5 Mania has received a few new sets of different cams with different specs for the MZR and are currently trialling them, and working out what is best for 2.5 "powers" with stock internals, in the end if I go bigger than the Kelford stage 1 cams I'll need to look at the valve springs  Hopefully I'll get the news on them next week As for the boot of the car getting fixed, I hopefully pick it up early next week, I was sweating on picking it up yesterday but, meh, it was not to be, so ne weekend cruising for me
×
×
  • Create New...