Jump to content
SAU Community

Tomei Exhaust Manifolfds For Rb26- Will It Change The Sound Of The Car?

drifter 33
 Share

Recommended Posts

arep3 Experienced

arep3

Posted
Posted

You guys are funny! :blush: if you wanna do something with your exhaust manifolds, port out the stocks. they wont crack in 12 months time like stainless. Do it now while your turbos are off.

Tomei_Powered Rising Star

Tomei_Powered

Posted
Posted (edited)

arep3,

second on that!

For better response besides changing the manifold, grind off the bulging / hump part of the cylinder head. Port and polish it. Port match the ex manifold to the cylinder head.

You will feel the response to be much better after doing this.

Edited by Tomei_Powered
rev210 Grand Master

rev210

Posted
Posted
do you actually read hpi? find me one car, or one add for neons.

its a magazine, im not taking what they say as gospel, but its more believable then alot of other bullshit that gets posted on here...

No I don't buy or read it. I'm sure it's a good magazine. I am being an idiot :P

VB- Veteran

VB-

Posted
Posted

finally we can agree on something.

anyway, if you guys are referring to the magazine article when you say it needs to be tuned, the car already had the extra bits, it was tuned with the PFC to make the 306kw, then they pulled the parts off and ran it again, dont know what was done tuning wise before replacing with stock parts

infamous_t Veteran

infamous_t

Posted
Posted

Read the article this arvo, I don't believe the cars initial tune made the most of the upgraded components, not saying it wasn't tuned tho.

Oddly tho they said they put the stock gtr exhaust, I was always under the assumption that this was quite restrictive for 300 odd Kw application, and often one of the first mods worthwhile on any car :P

They also said 'peak power' barely change, but mods like cams aren't always aimed at peak power, often mid range or low end improvement is what people are after.

But overall I would agree that manifolds on the GTR only need replacing in high HP setups, often after more crucial components have been sorted first.

arep3 Experienced

arep3

Posted
Posted

Guys if you wanna do your exhaust manifolds, look up / Google power porting or extrude honing. Power porting is Aussie! Extrude Honing is American technology... You can guess which 1 ill be getting done.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted (edited)
dont upgrade parts on your gtr, it will go faster. r31nismoid said so.

unfortunately for you spillmer he's 100% correct :P

this time

extrude honing the stockers will keep heat in the gas path due to the thick walled construction of the cast items. Ceramic coating them in the proper 'High temp black' (not the fancy chrome crap) is something that will help too.

Edited by DiRTgarage
RPMGTR Community Regular

RPMGTR

Posted
Posted
unfortunately for you spillmer he's 100% correct :P

this time

We have actually had to do this several times.....The results are heart-breaking.....

Examples

360kw HKS 2530 equipped GTR- Remove stainless hks manifolds because they were cracked and replace with stock items. - Result: Identical dynograph and power

375kw Garrett -5 equipped GTR - Remove standard manifold and dumps, replace with Tomei items. - Result: Absolutely identical dynograph and power.

These examples are great because the ONLY change was the items mentioned nothing else.

The tunes were also subsequently tickled but showed the same results.

Surely it can't be....they look sooo nice. :D

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
We have actually had to do this several times.....The results are heart-breaking.....

Examples

360kw HKS 2530 equipped GTR- Remove stainless hks manifolds because they were cracked and replace with stock items. - Result: Identical dynograph and power

375kw Garrett -5 equipped GTR - Remove standard manifold and dumps, replace with Tomei items. - Result: Absolutely identical dynograph and power.

These examples are great because the ONLY change was the items mentioned nothing else.

The tunes were also subsequently tickled but showed the same results.

Surely it can't be....they look sooo nice. :P

heart breaking...and knuckle breaking...i did this job twice on the weekend. Put balance pipe manifolds on my car Ben...it seems to have softened it up a little. see thread http://www.skylinesaustralia.com/forums/Ba...-R-t218709.html will be dynoing it friday too see what just that change has done.

arep3 Experienced

arep3

Posted
Posted
We have actually had to do this several times.....The results are heart-breaking.....

Examples

360kw HKS 2530 equipped GTR- Remove stainless hks manifolds because they were cracked and replace with stock items. - Result: Identical dynograph and power

375kw Garrett -5 equipped GTR - Remove standard manifold and dumps, replace with Tomei items. - Result: Absolutely identical dynograph and power.

These examples are great because the ONLY change was the items mentioned nothing else.

The tunes were also subsequently tickled but showed the same results.

Surely it can't be....they look sooo nice. :P

See? Benno says stock manifolds are good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Stock rb25det neo questions

      By Kinkstaah · Posted

      I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I can't tell any difference steering the car.
    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • PranK
      R32 GTR EV? The leaf of the Godzilla's!

      By PranK · Posted

      https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • thatjawncrazy
      Mistakes were made, my R34 Story

      By thatjawncrazy · Posted

      don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...