Jump to content
SAU Community

Question About Welds On Ali Cooler Piping

VB-

By VB-,
in Fabrication

 Share

Recommended Posts

VB- Veteran

VB-

Posted
Posted

hey guys, just wondering, seen heaps of custom cooler piping, mostly on jap cars, that seems to have a weld not running around the pipe, but sort of along it on the bends. as i understand it mandrel bending with a machine isnt real common practice in japan, so they do it in other ways, is this something to do with it?

*as luck would have it i cant find many pics, something like this though:

2262532826_e6d346d6e1_o.jpg see the seam running along the radius?

FelixTRX Community Regular

FelixTRX

Posted
Posted

Donuts are two pressed (or spun) halfs that have to be welded together into a full ring, before you cut them at the angle you need. Aluminium is a soft metal that crushes easily unless it is handled correctly when bending.

Cheers, Greg.

Adriano Grand Master

Adriano

Posted
Posted
half donuts are spun - allows pipe out of flat sheet alloy, and the possibility of 180 degrees in different radius - cheapest option as for $25 ish you get 4 x 90 bends

Where do you get them for that price? Last time i checked JNT were a bit more (about $25 per half)

Craved Grand Master

Craved

Posted
Posted

i get it at trade through a mates sheetmetal place - but it does depend on the diameter piping you need - JNT have 4" for $25 per half

hardest thing to get these days i've found is thin wall 3" straight lengths - took 3 weeks to get a length in

The BOP Enthusiast

The BOP

Posted
Posted

You buy donuts because you get a tighter raduis than any bends you can get, and to get any angle cut you like they are awsome for making radiators and the like try them out If your in Melbourne pm me and I'll hook you up with some

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Anyone know this frontpipe?

      By Murray_Calavera · Posted

      Would this not be the same for the exhaust you've posted up?  If your exhaust volume and emissions are fine, why does the brand of pipe matter? 
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      The issue is more the fact that there is inspectors that deal with japanese cars a lot and they might know what a real Mines pipe looks like. And then they're gonna get antsy and not pass your car. But I'd have to talk to one of them about this, because you know as well as me that it's just a damn pipe and it effectively doesn't do anything. As I need to have my GT2860s and my exhaust setup (and the increase in HP) TÜV'd anyways maybe they can just correct the entry in the papers or assign a badge to the front pipe. I'm no expert either though, will inquire about this.     Thanks for the insight. Not sure if having a custom made pipe is good or not. Will find out in due time I suppose. Would be kind of funny if this was made in Germany though.
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      See this is a really tricky topic as technically the same rules apply to all cars but for cars but there is a difference. If you want to modify a car like the Skyline which never existed here you have a bit more freedom as they do not adhere to EU specs anyway. Any modification you do has to be in dividually checked anyway so as long as one of the inspectors think it's ok and within the TÜV ruleset you can get stuff like a top secret rear diffuser put in your papers. Which frankly would need a shitload of tests and certificates for EU spec cars, like a 2010 BMW M3 for example. But if you DO run these tests and all tests come out ok (safety stuff for the most part) there is no problem running such a part legally. It's just way too expensive to do for a single person on one car. The most touchy parts are emissions related mods, like an exhaust, turbos, air intakes. If it makes noise or alters the carbon emissions it's essentially illegal until you prove it's not. Meaning it doesn't exceed noise limits or have worse carbon emissions. I'd say for hoses if you replace them same same it doesn't matter what material they are or what brand you use. Same for nuts and bolts usually, they won't go and specifically check that your water hoses and some bolts are 100% OEM parts, that is nonsense.
    • joshuaho96
      New fix for low tyre pressure from bmw

      By joshuaho96 · Posted

      What I don't understand here is that it mentions using a sealant. So either way you're ruining the inside of the tire and making a huge mess to clean up. Why not just do that, air it back up to spec, then take it all off and put it back in the car? Also, why not just include a plug kit that's not garbage?
    • GTSBoy
      2004 Subaru Forester X Under Cover craziness!

      By GTSBoy · Posted

      What a f**king weener. I have worked in Gary, IN. At the time there were more gun deaths each night there than almost anywhere else in the world. Still not a reason to be afraid. 95% of people from your part of the world only have 3 teeth left from when you were addicted to meth, and now you're perpetually wrecked by Fentanyl. The only saving grace is that most of you didn't vote for Trumpler. Speaking of which, I'm off to the oval office right now. Got to relieve my bowels.  
×
×
  • Create New...