Jump to content
SAU Community

Recommended Posts

I always thought warming the car up in the morning at idle is a necessary thing to do, until 2 of my mates told me that they read its better for the car to breath air as they warm up so just to drive it normally without pushing it too much for the first 5 mins.

Apparently its not too good for the car to be warmed up at idle, is this true?

What are your opinions on this? (Im so confused)

Link to comment
https://www.sau.com.au/forums/topic/218648-warming-car-up-at-idle/
Share on other sites

the thing is, its not only the engine that needs warming up... ur gear box and diff also needs to be warmed up....

Its better to turn on the engine.. give it about 15 seconds for the oil to start pumping in and around... then take it easy on the road.. i.e shift before 3000rpm, or even better 2700 rpm until operating temp as been reached.

Your engine will warm up faster if ur driving it as well.

Hope this helps,

Brendan

There was an article in The Age's Good Weekend, about 12 months ago, by Karl Kruszelnicki. Some of what it says:

- Engines run best at their design temp. Idling is not the best or quickest way to warm up an engine. GENTLE driving is.

- When idling, the fuel is not completely burnt. Unburnt fuel condenses on the cylinder walls, washing the oil off the cylinder walls and also thinning the oil.

- Idling drops spark plug temps, leading to dirty plugs, causing poor fuel economy.

- Idling prevents the catalytic converter reaching its design temp (400 -800C).

- Even in Canada, at -20C, it is recommended no more than 15-30 sec before driving from cold start. So even less is desirable in warm Oz.

Canada's Office of Energy Efficiency calculated that 5 minutes less idling each day would save $646 MILLION in fuel costs and and 1.6 million Tonnes greenhouse gases per year, in Canada alone.

hahah thanks for the help, also i shoulda done a search but i couldn't be bothered last night so late. :blush:

yer the thing is i warm up the car every morning for about 10 mins, so i thought maybe i should change my way of warming up now if its bad for the engine. and no wonder my petrol always dissapears every next day lol

Oh yeah another question, then if i wanted to cool down the turbo and engine after a long cruise/speeding, do i keep the car engine at idle for that? is that okay too? or do i just turn the engine off after few mins of turbo cool down for the engine to cool down best?

Edited by R33Turbo

i used to let it warm up but i read it might glaze the engine so i just take it easy untill the car is up to running temp. saves on fuel too..ha.

as for cool down, unless your drive way is at the end of a quarter mile, driving your car conservatively a couple blocks befor your home is more than enough to let it cool down i recon...then the ttimer will take care of the rest. mines set to only 30secs anyways, it used to be at 50secs but i found it pointless after a while.

i used to let it warm up but i read it might glaze the engine so i just take it easy untill the car is up to running temp. saves on fuel too..ha.

as for cool down, unless your drive way is at the end of a quarter mile, driving your car conservatively a couple blocks befor your home is more than enough to let it cool down i recon...then the ttimer will take care of the rest. mines set to only 30secs anyways, it used to be at 50secs but i found it pointless after a while.

Besides my GTR and some 31's I have a 700h/p daily driver ute and it has forged pistons which are noisy when cold because of the swell required in the piston material to bring it to the required piston to bore clearance.

The way I understand it the result of revving or driving the car before the pistons have swollen to the required tolerance and putting load on the engine is that the piston moves in an oval movement, although only slightly at low revs, until the swelling is complete then it travels in a more direct path up and down the bore necessitating much less wear,obviously the higher the revs when cold the more times the piston is exposed to pre swollen wear as load accentuates the oval movement.

Of course I'm talking about forgies here which is the most extreme tolerance piston to bore clearance,so a normal piston would not have as much problem and therefore warm up would not be as important as I believe it is for my engine,but I believe cold start wear is less about oil temp as many people think and far more about piston swell and tolerances,so in normal car circumstances I agree with the other posters to take it easy till engine temps are reached.Cheers Grey Pearl.

u do know it only takes 30sec for a turbo to spool down right?'

'mafia' et al.

3 min is a bit excessive for a trip to the shops. i just cool for 10sec maybe 20sec

must be a 'cool' factor in leaving a vehicle running while u strut past all the customers :(

Edited by r33cruiser

I give it the time it takes to smoke a cigarette. Cool down, I just don't thrash it for the last few blocks to my house then give it the time it takes to grab my wallet, phone etc. If I've just hammered it into my driveway I'll give it a minute or so.

Most people do not need turbo timers on their cars... Simple as that... The only reason somee do is because they heat the turbo up so much that it will seize if not given the time to cool down...

Who drives like an idiot on the road, pushing their car so hard all the way to their drive way to need one???

Most people do not need turbo timers on their cars... Simple as that... The only reason somee do is because they heat the turbo up so much that it will seize if not given the time to cool down...

Who drives like an idiot on the road, pushing their car so hard all the way to their drive way to need one???

Point being is whilst you may be able to get a turbo timer you cannot get a brake rotor timer, a calliper timer, a gearbox timer, a transfer case timer, a diff timer.....

With regard to warming the engine the procedure should be this:

1. Get in car.

2. Start car.

3. Drive off gently.

Anything else is a waste of petrol, will wear your engine out quicker & most importantly will annoy the crap out of your neighbours or the bloke lined up to take your parking bay.

Point being is whilst you may be able to get a turbo timer you cannot get a brake rotor timer, a calliper timer, a gearbox timer, a transfer case timer, a diff timer.....

With regard to warming the engine the procedure should be this:

1. Get in car.

2. Start car.

3. Drive off gently.

Anything else is a waste of petrol, will wear your engine out quicker & most importantly will annoy the crap out of your neighbours or the bloke lined up to take your parking bay.

BAM!! hit the nail on the head.

save the cool down time and warm up time for the track

...will annoy the crap out of your neighbours or the bloke lined up to take your parking bay

Id glass my neighbor if they idled their stock 34 every morning for 10mins.

- Start, idle 20s from cold, drive gently for 5mins - done.

- Don't load the car up 5 mins before stopping - done.

Id glass my neighbor if they idled their stock 34 every morning for 10mins.

- Start, idle 20s from cold, drive gently for 5mins - done.

- Don't load the car up 5 mins before stopping - done.

lol so it wears the engine out at idle than whilst driving in cold is it?

What does it mean by "it wears engine out quicker" is it bad at idle?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
×
×
  • Create New...