Engine Bay Pictures

[l0WRB]

meh here is mine

looks crap compared to everyone elses lol

[zebra]

Mine beats yours for crapness

But a Big Thanks to Mick from on road Parts & Performance for the new piping

Edited August 29, 2008 by zebra

[thrtytwo]

some HOT engine bays in here, can anyone shed some light on the cam cover breather fittings for me ?

what do i need to get to replace these with aftermarket ones, can i just get threaded fittings or do i need to sort it out with the PCV ??

edit: RB20

[PSI Parts]

some HOT engine bays in here, can anyone shed some light on the cam cover breather fittings for me ?

what do i need to get to replace these with aftermarket ones, can i just get threaded fittings or do i need to sort it out with the PCV ??

edit: RB20

You need to make sure you retain the one way valve on the PCV. (on the side of the rocker cover). You can change the top two oil breather hoses without any dramas. I had threads welded on however you can get the Earls finishers if you are only after the hose end look.

[Dahtone Racing]

heres another that we are working on

[H@ME]

wow that looks amazing simple, but stunning!! cant wait to get my manifold on!

[Shaun]

Where do you put the fuse box when you hide the wiring?

Also, what do you do with the metal brake lines coming from the ABS; do you get them powder coated or something, or do you just leave them with that wierd green coating on them.

Im gonna seriously tidy up my engine bay next year.

[drgnball34]

RB25/30 NEO

[Dahtone Racing]

Where do you put the fuse box when you hide the wiring?

Also, what do you do with the metal brake lines coming from the ABS; do you get them powder coated or something, or do you just leave them with that wierd green coating on them.

Im gonna seriously tidy up my engine bay next year.

there are two choices for the fuse box (depends on the budget of the customer)

1. in the guard (under where the battery would normally sit)

2. inside the car

this car doesn't have ABS

but with brake lines we can make complete new ones from pipe or braided hose

also the stock ones can be chromed or painted or what ever the customer wants

[studricho]

Here's my RB25 in a torana engine bay. I was thinking about getting the cam covers painted the same colour as the car, but it may look gay...dunno yet. What do you guys think?

It's funny how there seems to be more room in here than a skyline engine bay, but once you get near the chassis rails it's very tight..

[Nisswreck]

here's mine, not finished yet tho...

[andygtr93]

Here's the engine bay of my r32 GTR.. gonna clean it up a bit and paint more of the piping as well as the strut brace when Ive got more time

[super_s13]

that looks really good. I would just go black on the cam covers though. Engine bay paint looks really well done. Who did it.

[dano4127]

Anyone attempted painting the bay with the motor still in?

If you pulled off the manifolds there might be enough room to give it a decent freshen up...

[zebra]

Its gets done with other cars. So I dont see why not. Most Likely Wont come up as good.

Just Use Liberal Amounts of Towel and masking tape and a small spray gun like one with a 200ml pot or smaller to get it in to all the small places.

[Dahtone Racing]

i've seen it done but you can't do the bottom section of the firewall

[PSI Parts]

I'm painting the strut tops while the engine is still in, will let you know how it goes.

[studricho]

that looks really good. I would just go black on the cam covers though. Engine bay paint looks really well done. Who did it.

If your taling about my car, It was painted by a local painter in woonona. The colour itself is the secret. Kinda glows in the right light. You should see this colour near snow...

[SLY33]

Rb25DET torana, nice conversion, with a bit of tweaking you'll surely embarrass some import guys big time. What diff you gonna run? dont say the ol' bango

[studricho]

Rb25DET torana, nice conversion, with a bit of tweaking you'll surely embarrass some import guys big time. What diff you gonna run? dont say the ol' bango

LSD 9 inch 3.55 ratio with 17" rims. I'm running the R33 5 speed.