Hooking up S=AFC?

[rs73]

How easy is it to hook up S-AFC by yourself....?

Of course with the manual+diagram on hand...

(I'll still leave the setting up process for the expert

with dynos)

Should I solder the splice or just squeeze those

provided splice cap with a pair of tweezers...

or

maybe I'll just ask the workshop boyz to hook it up for me...

anyone done it b4?

[Jay95R33]

rs73,

Have a look at this link;

http://www.mkiv.com/techarticles/afc/index.html

It's not in a Skyline, but the install process should be the same.

If I was you I'd solder the wires cause I've had bad experiences with the crimp ones.

If you have any doughts, get the workshop blokes to do it.

Good luck

Jayson

[macka]

You need a proper crimper to use on thos lugs or u cand solder and heatshrink that is ultimately better.

You wouldnt want one of your airflow sensor wires to come off at 6000rpm

Other than that it is pretty straight forward if u are good on "the tools"

[rs73]

thx for all the info...

I'll have a closer look at the ecu connector once the weather's a bit dryer and sunnier, n when I have the time over the weekend...

[macka]

U could be real lucky like me and find that some bugga has already had one on and when i went to install all the cuts were there even the airflow meter had crimp conectors i just had to unplug and plug back into safc