Jump to content
SAU Community

Recommended Posts

From the Bosch Motorsport Fuel Pump Brochure

0 580 254 040 (Bosch 040), 102 l/h @ 6.5 bar

0 580 254 044 (Bosch 044), 200 l/h @ 5 bar

0 580 254 023 (Bosch 023), 168 l/h @ 5 bar (Rumoured to be the Nismo GTR upgrade pump)

But "Bosch Fuel Pumps have their flow rates defined in N-Heptane as part of their engineering specification. N-Heptane is a pure chemical and does not have the same viscosity and density as standard petrol. Hence the N-Heptane flow rate figures stated should be used as a general guide for comparison purposes only."

Other info I have gathered: (fwiw)

0580254040 (040)

Specs: 040

Flows 235LPH

Supply voltage 13.5V

Current consumption 13A

Weight 930g

Internal pump (only)

Connections:

Intake side M18 x 1.5

Pressure side M12 x 1.5

Electrical +:M6 / -:M5

Bosch Part Number - 0580254044 (044)

Specs: 044

Performance Operates: 325 LHP

Supply voltage 13.5V

Current consumption 13A

Weight 1030g

external pump (recommended)

Connections:

Intake side M18 x 1.5

Pressure side M12 x 1.5

Electrical +:M6 / -:M5

For reference: (via SK)

Std GTST pump is 135 litres per hour and supports 300 bhp at standard pressure

Std GTR pump is 190 litres per hour and supports 420 bhp at standard pressure

Bosch 910 pump is 200 litres per hour and supports 450 bhp at 73.5 PSI # 0 580 254 910

Bosch 975 pump is 228 litres per hour and supports 500 bhp at 73.5 PSI # 0 580 254 975

Bosch 984 pump is 228 litres per hour and supports 500 bhp at 73.5 PSI # 0 580 254 984

Bosch 040 pump is 235 litres per hour and supports 520 bhp at 73.5 PSI # 0 580 254 040

Bosch 044 pump is 330 litres per hour and supports 730 bhp at 73.5 PSI # 0 580 254 044

Hope it all helps.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...